PL-400 practice questions 171–180

1. Question 171 · 388 in bank

   A bank uses a Common Data Service solution to manage clients. Bank representatives perform client credit checks while the client is present. Credit checks may take up to five minutes to complete. Bank policy dictates that the bank representative's app must stay blocked until credit checks are complete. You need to display a model-driven app while credit checks run to ask the bank representative and client to wait for the credit check to complete. Which function should you use?

   • AXrm.Navigation.openWebResource("prefix.myPoliteMessage.html")
   • BXrm.Navigation.openAlertDialog(myPoliteMessage)
   • CXrm.Utility.openWebResource("prefix_myPoliteMessage.html")
   • DXrm.Utility.showProgressIndicator(myPoliteMessage)

   Show answer

   Answer: D

   Explanation

   Correct. I just don´t like the way they formulate the question: "You need to display a model-driven app" - can´t they say just, display a progressindicator?

   Source: Adapted from community discussion — markjr

   References

   • Microsoft Learn

   Next question

2. Question 172 · 388 in bank

   DRAG DROP - You are creating a model-driven app. Users need to see only the entities in the app navigation that are relevant to their role and their method of accessing the app. You need to restrict entities on the sub-areas in the SiteMap. Which properties should you use? To answer, drag the appropriate properties to the correct requirements. Each property may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Privileges - Privileges: This defines whether a subarea is displayed based on privileges available in any security roles that are assigned to the user. Box 2: SKU - SKUs: Select the versions of Dynamics 365 that display this subarea. Box 3: Client - Client: Select the type of client that displays this subarea. Incorrect Answers: Offline Availability: Select this check box to make this subarea available to users when they are offline in Dynamics 365 for Outlook. Reference: https://docs.microsoft.com/en-us/powerapps/maker/model-driven-apps/create-site-map-app

   References

   • Microsoft Learn

   

   Next question

3. Question 173 · 388 in bank

   HOTSPOT - You are troubleshooting Power Apps solutions. You need to determine the cause for the identified issues. What is the root cause for each issue? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: A canvas app in the first solution has errors. Failures that occur during background processing of the analysis will fail with 'Couldn't be completed' status and return an error message in the Power Apps portal as well as send email notification to the requestor. Selecting the portal notification will link to this page of common issues for further troubleshooting. If one of the provided common issues does not resolve the problem, a reference number is also returned. Provide this reference number to Microsoft Support for further investigation. Box 2: The code uses the following rule: web-use-strict-mode web-use-strict-mode is able to throw a SyntaxError before the script is executing. Example: The reason is JavaScript lets you compare different variable types but this can have unexpected results, so by using the strict === it compares the same type and won't have unexpected results this gets a warning entity.field == "Line1" Incorrect Answers: web-avoid-eval: The eval() function evaluates JavaScript code represented as a string. web-avoid-modals: Avoid using modal dialogs. web-remove-debug-script: Avoid including debug script in non-development environments. Reference: https://docs.microsoft.com/en-us/powerapps/maker/common-data-service/common-issues-resolutions-solution-checker

   Source: Adapted from community discussion — TheMaty

   References

   • Microsoft Learn

   

   Next question

4. Question 174 · 388 in bank

   You create a Power Apps app that integrates with Dynamics 365 Customer Service. You update the app and run solution checker on the original solution. You receive an error stating solution checker cannot export the solution. You need to determine the primary cause for the issue. What is the primary cause?

   • AThe original solution is locked because there is a dependent patch.
   • BThe solution was not exported before running solution checker.
   • CThe environment is in Administrator mode.
   • DSolution checker cannot check default solutions.

   Show answer

   Answer: A

   Explanation

   For default solution, solution checker option will not be available. option D needs to be ruled out. option A is the right answer. reference link : https://docs.microsoft.com/en-us/powerapps/maker/data-platform/common-issues-resolutions-solution-checker #Solution checker fails to export patched solutions.

   Source: Adapted from community discussion — Prakash4691

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

5. Question 175 · 388 in bank

   HOTSPOT - You are creating a model-driven app to track the time that employees spend on individual projects. You need to configure the app according to the company's requirements. Which components should you configure? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: View - Search for rows and create personal views with modern advanced find When your administrator enables the modern advanced find experience, it lets you search for rows and create personal views in your app. Box 2: Quick View - Quick View - Used in model-driven apps, Dynamics 365 for tablets, and Dynamics 365 for Outlook. For updated tables, these forms appear within the main form to display additional data for a row that is referenced by a lookup column in the form. Users can view data from related tables without having to leave the form. Incorrect Answers: * Quick Create - Used in model-driven apps, Dynamics 365 for tablets, and Dynamics 365 for Outlook. For updated tables, these forms provide a basic form optimized for creating new records. * Card - Used in views for model-driven apps. Card forms are designed to present information in a compact format that is suitable for mobile devices. Reference: https://docs.microsoft.com/en-us/power-apps/user/advanced-find https://docs.microsoft.com/en-us/power-apps/maker/model-driven-apps/types-forms https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/customize-entity-views

   Source: Adapted from community discussion — saadnadir

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

6. Question 176 · 388 in bank

   HOTSPOT - You are developing a Power Platform solution. You plan to add three buttons to a form. The buttons have the following requirements:

   

   You need to complete each button's action. Which commands should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Now() only. The Now function returns the current date and time as a date/time value. Box 2: Switch() or IF() If and Switch functions in Power Apps determines whether any condition in a set is true (If) or the result of a formula matches any value in a set (Switch) and then returns a result or executes an action. Box 3: isMatch( TextInput1.Text,"emergency",Contains & IgnoreCase ) Example: IsMatch( TextInput1.Text, "hello", Contains & IgnoreCase ) Tests whether the user's input contains the word "hello" (case insensitive). Reference: https://docs.microsoft.com/en-us/powerapps/maker/canvas-apps/functions/function-if

   Source: Adapted from community discussion — No_Doubt

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

7. Question 177 · 388 in bank

   HOTSPOT - A company uses SharePoint for its intranet and other functions. The company has also implemented model-driven apps. SharePoint users must be able to create contact records in Microsoft Dataverse without having to navigate to the model-driven apps. You need to create a link in SharePoint to open the Dataverse contact form displaying data from SharePoint. How should you complete the URL? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: main.aspx - Example, to open the Active Contacts view. https://myorg.crm.dynamics.com/main.aspx?etn=contact&pagetype=entitylist&viewid={00000000-0000-0000-00AA-000010001004} Box 2: etn - Etn: The logical name of the entity. Important: Do not use the etc (entity type code) parameter that contains an integer code for the entity. This integer code varies for custom entities in different organizations. Box 3: Extraqs - Extraqs: Optional for forms. This parameter contains encoded parameters within this parameter. When you open a new form by using the URL address, you can include arguments in the extraqs parameter to set field values Note: You must encode the parameters passed in the extraqs parameter. To encode the parameters, use encodeURIComponent. To use special characters like "=" or "&" in the parameter values, you must double encode (e.g. to set name to A=B&C, it would be extraqs=name%3DA%253DB%2526C). Box 4: entityrecord - Example: Set the value for choice columns To set the value for a Choice column, set the integer value for the option. The following sample sets the Role column value to ג€Decision Makerג€ in a new contact record. The unencoded value for the extraqs parameter is ג€accountrolecode=1ג€. /main.aspx?etn=contact&extraqs=accountrolecode%3D1&pagetype=entityrecord Note: Pagetype: The type of page. There are two possible values: - entityrecord Displays an entity record form. - entitylist Displays an entity view. Reference: https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/open-forms-views-dialogs-reports-url https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/set-field-values-using-parameters-passed-form

   References

   • Microsoft Learn

   

   Next question

8. Question 178 · 388 in bank

   HOTSPOT - A company imports data from files. The following code is created to import the files. (Line numbers are included for reference only.)

   

   For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: No - The For Each loop is exited if there is an error. Need ContinueOnError in the right place. Box 2: No - The ContinueOnError statement should be placed in the For Each loop before line 13. Box 3: Yes - Box 4: No - This code is just for displaying the result on the screen.

   Source: Adapted from community discussion — DummyTest1

   

   Next question

9. Question 179 · 388 in bank

   Select 2

   You have the following code:

   

   You have a contact record that uses the GUID 991bf2fd-d40c-4752-9984-26b7c0455b69. You need to assign the contact record as the primary contact for an account when you create the account. Which two code segments can you use? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

   • Avar data = { "name": "Contoso account", "primarycontactid": { "logicalname": "contact", "id": "991bf2fd-d40c-4752-9984-26b7c0455b69" } };
   • Bvar data = { "name": "Contoso account", "primarycontactid@odata.bind": "/contacts(991bf2fd-d40c-4752-9984-26b7c0455b69)" };
   • Cvar data = { "name": "Contoso account", "primarycontactid@odata.context": "/contacts(991bf2fd-d40c-4752-9984-26b7c0455b69)" };
   • Dvar data = { "name": "Contoso account", "primarycontactid": "/contacts(991bf2fd-d40c-4752-9984-26b7c0455b69)" };

   Show answer

   Answer: AB

   References

   • Microsoft Learn

   Next question

10. Question 180 · 388 in bank

    DRAG DROP - A company has a model-driven app. A form that validates the date entered requires a custom button. The button must be available only under certain conditions. You need to define the CommandDefinition in the RibbonDiffXML to meet the conditions for the button. Which elements should you use? To answer, drag the appropriate elements to the correct conditions. Each element may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

    

    This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

    Show the answer figure

    Answer: See figure below

    Explanation

    Box 1: Display Rule - When configuring ribbon elements, you can define specific rules to control when the ribbon elements will display. Box 2: Action - Define the actions to be performed by a command bar or ribbon control in a <CommandDefinition> element together with rules that control whether the control is enabled or visible in the ribbon. Box 3: Enable Rule - When configuring ribbon elements, you can define specific rules to control when the ribbon elements are enabled. Reference: https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/define-ribbon-enable-rules https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/define-ribbon-display-rules https://docs.microsoft.com/en-us/powerapps/developer/model-driven-apps/define-ribbon-actions

    Source: Adapted from community discussion — CoktaiiL

    References

    • Microsoft Learn
    • Microsoft Learn
    • Microsoft Learn
    • Microsoft Learn

    

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

PL-400 practice, question 171. 388 questions available.