PL-400 practice questions 141–150

1. Question 141 · 388 in bank

   Select 2

   You need to configure the app to meet the address verification requirements. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • AMake the address fields read-only after they have been verified.
   • BOpen a confirmation dialog when the command bar button is selected.
   • CEnable the command bar button only when the address shows as not verified.
   • DClear the field indicating the address is valid when an address field changes.

   Show answer

   Answer: CD

   Explanation

   Address requirement: > The system must perform address validation any time an address is added or updated in the model-driven app user interface. > Validation must not be performed unless an address is changed. > Users must initiate address validation by selecting a button on the command bar. > The user must re-enter the address information to trigger validation. From those, we can get 2 points: 1.) Address can be changed after it's verified. 2.) Ability to run validation can be disabled if there are no changes to the address. So C&D.

   Source: Adapted from community discussion — northstar88

   Next question

2. Question 142 · 388 in bank

   Select 2

   You need to configure the solution to meet the requirements for driving record verifications. What are two possible ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

   • ACreate an Azure Logic Apps connector.
   • BUse a connector provided by the driving record verification service.
   • CShare a custom connector for the driving record verification service with a member of the talent department.
   • DShare the flow with a member of the talent department.

   Show answer

   Answer: AC

   Explanation

   Requirements. Driving record verification ✑ Driving record verification must only be performed once for each candidate. ✑ Information required for driving record verification must be sent to the driving record verification service automatically after the candidate's address is verified. ✑ The API must return a value of either Approved or Rejected to indicate whether the candidate has met the company's requirements.

   Source: Adapted from community discussion — northstar88

   

   Next question

3. Question 143 · 388 in bank

   HOTSPOT - You need to implement the driving record check functionality. What should you implement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: After the address validation field changes on the screen Step 1, comments: The address verification process provides a response almost immediately on the screen Verification process - Box 2: Cloud Flow - Driving record verification - The company has provided an OpenAPI document to describe its RESTFUL Api. Use Custom APIs to create your own APIs in Dataverse. You can consolidate one or more operations into a Custom API that you and other developers can call in their code or from Power Automate. The Microsoft Dataverse connector enables calling actions in Power Automate. Reference: https://docs.microsoft.com/en-us/power-apps/developer/data-platform/custom-api

   

   Next question

4. Question 144 · 388 in bank

   HOTSPOT - You need to configure the environments. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Compile the plug-in in debug mode Development: You must be able to step through code and inspect the value of variables. Box 2: Enable trace log in the environment Production: You must be able to view tracing service logs.

   Source: Adapted from community discussion — northstar88

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

5. Question 145 · 388 in bank

   HOTSPOT - You need to configure the address verification API. Which values should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Execute - You need to configure the address verification API. Action: A user enters the candidate address into a third-party website to verify that the address entered is valid. Box 2: Synchronous - The address verification process provides a response almost immediately on screen.

   Source: Adapted from community discussion — Flatternschuchtern

   

   Next question

6. Question 146 · 388 in bank

   HOTSPOT - You need to design functionality to process background check results. What should you implement? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Pull - After submitting candidate information, users must periodically check the website to see if a response has been posted. Box 2: The background check process goes through a number of stages before reaching the final result. Need just to update the state changes, not to insert. Note: Reference: https://docs.microsoft.com/en-us/power-apps/developer/data-platform/use-upsert-insert-update-record

   Source: Adapted from community discussion — Vinodds

   

   Next question

7. Question 147 · 388 in bank

   You need to resolve the address validation API error. Which method should you use to connect?

   • Aan Azure function triggered by a webhook
   • BJavaScript code
   • Ca custom connector used in a cloud flow
   • Da plug-in attached to a custom action called from JavaScript

   Show answer

   Answer: C

   Explanation

   C is answer. This I can clearly verify.. i always get CORS issues running an API from a Javascript code or Azure Function. However, if you are able to use Power Automate there is no CORS issue

   Source: Adapted from community discussion — ziggy1117

   Next question

8. Question 148 · 388 in bank

   HOTSPOT - You need to correct the JavaScript code that communicates with the address verification API. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   There are several related questions and all poiting to an action + a plugin for address validation. So answer is: No - should be changed to contoso_ValidateAddressRequest Yes - it's obvious Yes - server call from a plugin will fix the Origin issue

   Source: Adapted from community discussion — vrpexamtopics

   References

   • Microsoft Learn

   

   Next question

9. Question 149 · 388 in bank

   HOTSPOT - You need to configure a connector for the driving record verification API. How should you configure the system? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: OAuth 2.0 - Use API keys if you expect developers to build internal applications that don't need to access more than a single user's data. Use OAuth access tokens if you want users to easily provide authorization to applications without needing to share private data or dig through developer documentation. Requirements. Driving record verification ג€¢ Driving record verification must only be performed once for each candidate. ג€¢ Information required for driving record verification must be sent to the driving record verification service automatically after the candidate's address is verified. ג€¢ The API must return a value of either Approved or Rejected to indicate whether the candidate has met the company's requirements. Box 2: Pass Credentials as parameters User makes an API call with the authorization header and the token gets validated by using validate-jwt policy in APIM by Azure AD. Note, see step 4 below. In this Diagram we can see the OAUTH flow with API Management in which: 1. The Developer Portal requests a token from Azure AD using app registration client id and client secret. 2. In the second step, the user is challenged to prove their identity by supplying User Credentials. 3. After successful validation, Azure AD issues the access/refresh token. 4. User makes an API call with the authorization header and the token gets validated by using validate-jwt policy in APIM by Azure AD. 5. Based on the validation result, the user will receive the response in the developer portal. Reference: https://zapier.com/engineering/apikey-oauth-jwt/ https://techcommunity.microsoft.com/t5/azure-paas-blog/protect-api-s-using-oauth-2-0-in-apim/ba-p/2309538

   Source: Adapted from community discussion — northstar88

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

10. Question 150 · 388 in bank

    You need to implement the background verification check stage field. Which type of field should you use?

    • AChoice
    • BStatus
    • CChoices
    • DLookup

    Show answer

    Answer: D

    Explanation

    It's a lookup! Answer is D The returned value may signify whether the candidate is automatically rejected, automatically passed, or calls for further manual investigation. The content and number of stage values is subject to change. The HR department must be able to update the stage values. Are we going to ask the HR department to enter the customizations and change the optionset choice value? surely NO!

    Source: Adapted from community discussion — No_Doubt

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

PL-400 practice, question 141. 388 questions available.