Implementing Cisco Enterprise Network Core Technologies (ENCOR)1,003 questions across 101 pages are complete and free, with no account or card.
1003 questions in this bank
Free access · progress saved on this device
What is a benefit of a virtual machine when compared with a physical server?
Answer: A
Definitely not C, because CPU resources are shared in all well known hypervisors, RAM may be shared or not (depends on hypervisor)
Source: Adapted from community discussion — johnmcclane78
SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices. • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked, the lab closes and cannot be reopened. Topology -
Tasks - OSPF is partially configured. Complete the OSPF configurations to achieve these goals: 1. Configure R3 and R20 so they do not participate in a DR/BDR election process in Area 20. 2. Configure R10 so it is always the DR for Area 10. Do not change the router ID.
This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.
Answer: See figure below
I passed the exam today Most questions are discussed here Maybe 7-10 new questions that are still related to the discussions here Total 88 questions 4 Labs 1- #878 - VRF Configuration (exactly like the one here, with no IPSec) 2- #896 - eBGP Configuration (exactly like the one here) 3- #900 - OSPF Configuration (exactly like the one here) 4- Switching lab with 3 tasks: a) Make a switch use 32 bits for STP port cost path calculations (command: spanning-tree pathcost method long) b) Troubleshoot problem with trunk (ISL / dot1q mismatch) c} Troubleshoot problem with LACP (ports not added to port channel) I hope this helps everyone You guys are awsome
Source: Adapted from community discussion — aymanmah
An engineer must configure interface and sensor monitoring on a router. The NMS server is located in a trusted zone with IP address 10.15.2.19. Communication between the router and the NMS server must be encrypted and password-protected using the most secure algorithms. Access must be allowed only for the NMS server and with the minimum permission levels needed. Which configuration must the engineer apply?
Answer: B
Easy explanation for why B is right A- permit 1 host 10.15.2.19 any (this wrong because in extended ACL we dont have a command like that). C- use the full permission (RW) and use the weak algorithm (des). D- use the wrong wildcard mask(255.255.255.255) and use the weak algorithm (3des).
Source: Adapted from community discussion — shefo1
Refer to the exhibit. An engineer attempts to configure standby group 512 on interface GigabitEthernet0/1, but the configuration is not accepted. Which command resolves this problem?
Answer: D
Correct! In HSRP version 1, group numbers are restricted to the range from 0 to 255. HSRP version 2 expands the group number range from 0 to 4095.
Source: Adapted from community discussion — ciscoccie20
Which mechanism does OAuth use to strengthen REST API security when compared to BasicAuth?
Answer: A
OAuth uses tokens to strengthen REST API security compared to BasicAuth. With BasicAuth, the user's credentials (username and password) are sent with each request, which poses a security risk, especially if intercepted. In contrast, OAuth issues tokens (access tokens or bearer tokens) to clients after successful authentication, and these tokens are used for subsequent requests.
Source: Adapted from community discussion — slacker_at_work
What is the API keys option for REST API authentication?
Answer: A
An API key is a string of characters used to identify and authenticate an application or user who requests the service of an API.
Source: Adapted from community discussion — slacker_at_work
Refer to the exhibit. The web server is configured to listen only to TCP port 8080 for all HTTP requests. Which command is required to allow Internet users to access the web server on HTTP port 80?
Answer: C
To allow Internet users to access the web server on HTTP port 80 when the web server is configured to listen only on TCP port 8080, you need to create a static Network Address Translation (NAT) rule that translates incoming requests on port 80 to port 8080 on the web server. The correct command to achieve this is: C. `ip nat inside static tcp 10.1.1.100 8080 172.16.1.3 80` Here's a breakdown of the command: - `ip nat inside static tcp`: This specifies a static NAT translation for TCP traffic on the inside interface. - `10.1.1.100 8080`: This is the local address of the web server and the port it's listening on (8080). - `172.16.1.3 80`: This is the public address (on the outside interface) and the port that will be used for incoming traffic (80). So, the command translates requests coming to `172.16.1.3` on port `80` to `10.1.1.100` on port `8080`, effectively allowing the web server to receive HTTP requests on port 80.
Source: Adapted from community discussion — Shri_Fcb10
Refer to the exhibit. What is achieved by this Python script?
Answer: D
D. It reads JSON data into a formatted list. The script makes HTTP requests to a specified URL, retrieves JSON data, and processes it to create a formatted list. In this case, it appears to be extracting version information and a list of bad IP addresses from a web service.
Source: Adapted from community discussion — teems5uk
Refer to the exhibit. An engineer must configure router R1 to allow only NETCONF connections from the management VLAN. Which command completes this configuration?
Answer: B
B, but it is missing the 'ssh' keyword : netconf-yang ssh {{ipv4 | ipv6 }access-list name access-list-name} | port port-number}
Source: Adapted from community discussion — gorillaenhanced
Refer to the exhibit. An engineer applies this configuration to R1: ip nat inside source static 192.168.10.17 192.168.27.42 Which command set should be added to complete the configuration?
Answer: A
A is correct. "ip pat" isn't a command, so that strikes B and C. D has the inside/outside interfaces swapped per the existing config.
Source: Adapted from community discussion — Mistwalker
Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page
350-401 practice, question 911. 1003 questions available.
Version 1.0.0. How we source questions