350-401 practice questions 951–960

1. Question 951 · 1003 in bank

   

   Refer to the exhibit. After unsuccessfully configuring an EtherChannel link, an engineer enables debugging. Which action will resolve the issue?

   • AConfigure the EtherChannel members in desirable mode.
   • BSet the EtherChannel to mode on.
   • CSet the EtherChannel to mode active.
   • DConfigure the EtherChannel members in passive mode.

   Show answer

   Answer: A

   Explanation

   im sure A is right because if you look this log message , you see the PAgP , means the misconfigurations in PAgP configuration , in result you ignore the options that is talking about LAcP + static B - on (static) C - active (LAcP) D - passive (LAcp)

   Source: Adapted from community discussion — shefo1

   Next question

2. Question 952 · 1003 in bank

   

   Refer to the exhibit. What is achieved by this code?

   • AIt unshuts the loopback interface.
   • BIt displays the loopback interface.
   • CIt renames the loopback interface.
   • DIt deletes the loopback interface.

   Show answer

   Answer: A

   Explanation

   I was mistaken: A. It unshuts the loopback interface. The element specifies the configuration of an interface. The element represents the loopback interface configuration. 100 specifies the name of the loopback interface, which is "100". true indicates that the loopback interface is enabled. The value "true" signifies that the interface is enabled. The provided XML code configures and enables a loopback interface with the name "100". This means that it unshuts (enables) the loopback interface.

   Source: Adapted from community discussion — slacker_at_work

   Next question

3. Question 953 · 1003 in bank

   Which collection contains the resources to obtain a list of fabric nodes through the vManage API?

   • Adevice inventory
   • Badministration
   • Cdevice management
   • Dmonitoring

   Show answer

   Answer: A

   Explanation

   Confirmed. A. device inventory The device inventory collection typically contains resources related to obtaining information about the devices connected to the network, including fabric nodes. Therefore, to obtain a list of fabric nodes through the vManage API, you would likely need to interact with the device inventory collection.

   Source: Adapted from community discussion — Osama_anwar

   Next question

4. Question 954 · 1003 in bank

   Which Cisco DNA Center Assurance feature verifies host reachability?

   • Apath trace
   • Bapplication experience
   • Cdetail information
   • Dnetwork time travel

   Show answer

   Answer: A

   Next question

5. Question 955 · 1003 in bank

   Which LISP component is required for a LISP site to communicate with a non-LISP site?

   • AProxy ITR
   • BITR
   • CETR
   • DProxy ETR

   Show answer

   Answer: D

   Explanation

   Sorry I forgot the post the article and here it is “ To establish communication between LISP and non LISP sites an extra components must be use, a proxy ingress tunnel router (PITR), which allows non-LISP sits to send packet toward LISP sites. The PITR attracts traffic from non-LISP sites by advertising aggregate prefixes for the LISP EID into the non-LISP network. When PITR receives packets from non-LISP sites it encapsulate and forward these packets to LISP sites. The second element to establish communication between the LISP and non-LISP sites is called a proxy egress tunnel router (PETR). The PETR allows the communication from the LISP sites to the non-LISP sites. The PETR receives LISP encapsulated traffic from ITR. The PITR and PETR can be combine and deployed on the same node called (PxTR) to provide symmetric traffic when stateful inspection devices are deployed between LISP and non-LISP sites.”

   Source: Adapted from community discussion — Nhan

   References

   • Cisco documentation

   Next question

6. Question 956 · 1003 in bank

   DRAG DROP - Drag and drop the code snippets from the bottom onto the blanks in the Python script to print the device model to the screen and write JSON data to a file. Not all options are used.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   json.dump() method used to write Python serialized object as JSON formatted data into a file. json.dumps() method is used to encodes any Python object into JSON formatted String

   Source: Adapted from community discussion — aatechler

   

   Next question

7. Question 957 · 1003 in bank

   DRAG DROP - Drag and drop the QoS mechanisms from the left onto their descriptions on the right.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   

   Next question

8. Question 958 · 1003 in bank

   DRAG DROP - Drag and drop the code snippets from the bottom onto the blanks in the script to convert a Python object into a JSON string. Not all options are used.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   annoys me that the second blank answer is ".encode" when the "." is already in the code snippet. But that's just bad question formatting. The given answer is still correct.

   Source: Adapted from community discussion — downturn66

   

   Next question

9. Question 959 · 1003 in bank

   DRAG DROP - Drag and drop the characteristics from the left onto the corresponding switching architectures on the right.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   

   Next question

10. Question 960 · 1003 in bank

    Which feature is offered by the Cisco Advanced Malware Protection for Endpoints solution?

    • AFile Sandboxing
    • BNetFlow
    • CTrustSec
    • DDNS Protection

    Show answer

    Answer: A

    Explanation

    A Sandbox analysis: If the file appears to be suspicious, the AMP solution might also execute it in a sandbox environment to observe its behavior in a controlled setting. This helps to identify any malicious activity that may not be immediately apparent. https://www.aquasec.com/cloud-native-academy/cloud-attacks/advanced-malware-protection/#:~:text=Sandbox%20analysis%3A%20If%20the%20file,may%20not%20be%20immediately%20apparent.

    Source: Adapted from community discussion — Calinserban

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

350-401 practice, question 951. 1003 questions available.