PL-400 practice questions 241–250

1. Question 241 · 388 in bank

   DRAG DROP - You are creating technical designs for several complex business processes. You need to implement custom business logic based on the requirements. Which implementation methods should you use? To answer, drag the appropriate implementation methods to the correct requirements. Each implementation method may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Business rule - You can create business rules and recommendations to apply logic and validations without writing code or creating plug-ins. Business rules provide a simple interface to implement and maintain fast-changing and commonly used rules. By combining conditions and actions, you can do any of the following with business rules: ✑ Set column values ✑ Clear column values ✑ Set column requirement levels ✑ Show or hide columns ✑ Enable or disable columns ✑ Validate data and show error messages ✑ Create business recommendations based on business intelligence. Box 2: Power Automate flow - You can create a cloud flow that performs one or more tasks (such as sending a report in email): ✑ Once a day, an hour, or a minute ✑ On a date that you specify ✑ After a number of days, hours, or minutes that you specify Reference: https://docs.microsoft.com/en-us/power-automate/run-scheduled-tasks

   References

   • Microsoft Learn

   

   Next question

2. Question 242 · 388 in bank

   Select 2

   You create a Power Automate flow that retrieves data from a proprietary database. You need to ensure that the flow works for other users. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • AShare a view with users.
   • BShare the custom connector with users.
   • CShare the flow with users.
   • DShare the environment by giving permissions to the users.

   Show answer

   Answer: BC

   Explanation

   BC are correct answers. B. Share the custom connector with users: If your flow is using a custom connector to connect to a proprietary database, you need to share the custom connector with other users who need to access the same data source. Custom connectors can be shared within your environment. C. Share the flow with users: You should share the flow itself with other users so they can access and run it. Sharing the flow allows other users to use the automation you've created.

   Source: Adapted from community discussion — MikeAWS

   Next question

3. Question 243 · 388 in bank

   Select 2

   A client requires that the system send an email from a button on their customer contact form. You need to call the action from JavaScript. Which two functions achieve this result? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

   • AXrm.WebApi.online.executeMultiple()
   • BXrm.WebApi.online.updateRecord()
   • CXrm.WebApi.online.createRecord()
   • DXrm.WebApi.online.execute()

   Show answer

   Answer: AD

   Explanation

   To call the action from JavaScript and send an email from a button on the customer contact form, you can use two functions: Xrm.WebApi.online.executeMultiple() : This function allows you to perform multiple operations in a single request. It could be used to call the action and send the email as part of a batch request. Xrm.WebApi.online.execute(): This function allows you to perform a single action, such as sending an email. Option B and C is not correct because they are used to update or create record respectively.

   Source: Adapted from community discussion — DimpleG

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

4. Question 244 · 388 in bank

   You are developing an app that uses Common Data Service. You must integrate Common Data Service with a new web application. You must allow the new web application to display data from Common Data Service. You build a single-page web application using the Web API. You need to authenticate your app using OAuth. What should you use?

   • AWindows Communication Foundation (WCF)
   • BCross-Origin Resource Sharing (CORS)
   • CMicrosoft Authentication Library (MSAL)
   • DKerberos authentication

   Show answer

   Answer: C

   Explanation

   Solution: Microsoft Authentication Library (MSAL) To authenticate your web application with OAuth and access data from Common Data Service, you should use the Microsoft Authentication Library (MSAL). MSAL provides authentication and authorization capabilities for various Microsoft services, including Common Data Service. It allows you to obtain access tokens that can be used to make authorized requests to the Common Data Service Web API. Cross-Origin Resource Sharing (CORS) is a security feature that enables web applications to make requests to a different domain than the one from which the web page originated. While CORS might be relevant in enabling your web application to access resources from different domains, it's not directly related to OAuth-based authentication and accessing data from Common Data Service.

   Source: Adapted from community discussion — MikeAWS

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

5. Question 245 · 388 in bank

   HOTSPOT - A company has a model-driven app. A custom button on a form calls a JavaScript function that validates form data fields and creates a web basket. The JavaScript function then displays a message to the user. Users are located in the United States, which uses ISO Code 1033, and France, which uses ISO Code 1036. Users in France report that the message displays in English. You need to modify the RibbonDiffXml file to ensure that messages appear in the user's language. How should you complete the CommandDefinition node? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: CrmParameter - In addition to data values, you can retrieve client context information by using <CrmParameter>. You can use the following options as the value for the CrmParameter element: OrgName, OrgLcid, and UserLcid. Box 2: UserLcid - userLCID is the language code of the current user. Note: A locale is a set of user preference information related to the user's language. The locale determines how dates, times, currencies, and numbers are formatted, how items are alphabetically sorted, and how strings are compared. The locale identifier (LCID) is a 32-bit value that uniquely defines a locale. Reference: https://docs.microsoft.com/en-us/dynamics365/customerengagement/on-premises/developer/customize-dev/pass-dynamics-365-data-page-parameter-ribbon- actions

   Source: Adapted from community discussion — Jnicosia

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

6. Question 246 · 388 in bank

   HOTSPOT - A company has a model-driven app that captures applications from prospective students. You are asked to create a new re-usable custom component using the Power Apps component framework (PCF). The custom component must allow entry of a date of birth and validate that the applicant is not a minor. You create the class AdultDatePicker in the TypeScript file Index.ts and the style sheet DatePicker.css. You need to define the component to be available only for relevant fields and its properties when used in a form. How should you complete the manifest? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: AdultDatePicker - Constructor: Constructor of the code component. Box 2: DateandTime.DateOnly - Date Only - No Time zone conversion. The time portion of the value is always 12:00AM. The date portion of the value is stored and retrieved as specified in the UI and Web services. Box 3: bound - usage: Has two properties, bound and input. Bound properties are bound only to the value of the field. Input properties are either bound to a field or allow a static value. Reference: https://docs.microsoft.com/en-us/powerapps/developer/component-framework/manifest-schema-reference/manifest https://docs.microsoft.com/en-us/powerapps/developer/component-framework/implementing-controls-using-typescript https://docs.microsoft.com/en-us/power-apps/maker/data-platform/behavior-format-date-time-field

   Source: Adapted from community discussion — Jett27

   

   Next question

7. Question 247 · 388 in bank

   DRAG DROP - An organization has a Dynamics 365 Sales environment. You need to create a Power Apps component. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Step 1: Run pac pcf init ג€"namespace .. This is the first command which creates basic folder structure of PCF control project. Run the following command to create the control. The format of the control is: pac pcf init ג€"namespace <specify your namespace here> ג€"name <put component name here> ג€"template <component type> Step 2: Run the npm install command Install Dependencies - Once 'init' sets up the basic folder, as a next step install all the PCF control dependencies using 'npm install' command. Example: Now at this point, there is nothing we have actually created. However, the solution created contains sample PCF control code. Step 3: Run the following np run build command Build PCF Component. Once you implement the PCF component, build the code for any syntax errors. Syntax: npm run build Reference: https://rajeevpentyala.com/2020/03/21/power-apps-component-framework-pcf-demystify/ https://carldesouza.com/creating-a-custom-component-using-the-powerapps-component-framework/

   Source: Adapted from community discussion — HelenJose

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

8. Question 248 · 388 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than once correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are developing a model-driven app for a company. When you create a new Account record, you must automatically display a form to collect data that is needed to create a Contact record. The form must switch to the appropriate form layout based on the contact type. You open the Contact form by using JavaScript. You pass the contact type information to the form by using the Xrm.Navigation.openForm function. An OnLoad event handler in the Contact form processes the data and shows only the appropriate sections of the form for the given contact type. You need to configure the receiving form to accept the data parameter. Solution: In the form editor, add an event handler for the data parameter. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   In order to pass the contact type information to the Contact form, you can use the Xrm.Navigation.openForm function which allows you to pass additional parameters along with the form. By adding an event handler for the data parameter in the Contact form, the form will be able to process the data and show only the appropriate sections of the form for the given contact type. This will meet the requirement of automatically displaying a form to collect data that is needed to create a Contact record and switch to the appropriate form layout based on the contact type. It's important to note that the event handler for the data parameter should be added in the form editor, and it should be able to process and handle the data passed to it.

   Source: Adapted from community discussion — DimpleG

   Next question

9. Question 249 · 388 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than once correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are developing a model-driven app for a company. When you create a new Account record, you must automatically display a form to collect data that is needed to create a Contact record. The form must switch to the appropriate form layout based on the contact type. You open the Contact form by using JavaScript. You pass the contact type information to the form by using the Xrm.Navigation.openForm function. An OnLoad event handler in the Contact form processes the data and shows only the appropriate sections of the form for the given contact type. You need to configure the receiving form to accept the data parameter. Solution: In the form editor, add a web resource that sets formContext.data.attributes. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   The solution provided does not fully meet the goal. While it is true that adding a web resource that sets formContext.data.attributes can be used to configure the receiving form to accept data parameters, it does not explain how the form processes the data and shows only the appropriate sections of the form based on the contact type. To meet the goal, you need to use JavaScript to add an OnLoad event handler to the Contact form that processes the data passed from the Account form and shows only the appropriate sections of the form based on the contact type.

   Source: Adapted from community discussion — DimpleG

   Next question

10. Question 250 · 388 in bank

    You are creating a model-driven app. A JavaScript function must be manually initiated by the user from within an entity form. You need to add a button to the form to run the JavaScript. What should you do?

    • AUse the Ribbon Workbench.
    • BEdit the SiteMap.
    • CEdit the XML for the form.
    • DEdit ISV.Config.
    • EExport the ribbon definitions.

    Show answer

    Answer: A

    References

    • Microsoft Learn

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

PL-400 practice, question 241. 388 questions available.