350-401 practice questions 381–390

1. Question 381 · 1003 in bank

   Select 2

   In which two ways does TCAM differ from CAM? (Choose two.)

   • ACAM is used to make Layer 2 forwarding decisions, and TCAM is used for Layer 3 address lookups.
   • BCAM is used by routers for IP address lookups, and TCAM is used to make Layer 2 forwarding decisions.
   • CCAM is used for software switching mechanisms, and TCAM is used for hardware switching mechanisms.
   • DThe MAC address table is contained in TCAM, and ACL and QoS information is stored in CAM.
   • EThe MAC address table is contained in CAM, and ACL and QoS information is stored in TCAM.

   Show answer

   Answer: AE

   References

   • cisco.com documentation

   Next question

2. Question 382 · 1003 in bank

   When firewall capabilities are considered, which feature is found only in Cisco next-generation firewalls?

   • Amalware protection
   • Bstateful inspection
   • Ctraffic filtering
   • Dactive/standby high availability

   Show answer

   Answer: A

   Next question

3. Question 383 · 1003 in bank

   A network engineer is enabling HTTPS access to the core switch, which requires a certificate to be installed on the switch signed by the corporate certificate authority. Which configuration commands are required to issue a certificate signing request from the core switch?

   • ACore-Switch(config)#crypto pki enroll Core-Switch Core-Switch(config)#ip http secure-trustpoint Core-Switch
   • BCore-Switch(config)#ip http secure-trustpoint Core-Switch Core-Switch(config)#crypto pki enroll Core-Switch
   • CCore-Switch(config)#crypto pki trustpoint Core-Switch Core-Switch(ca-trustpoint)#enrollment terminal Core-Switch(config)#crypto pki enroll Core-Switch
   • DCore-Switch(config)#crypto pki trustpoint Core-Switch Core-Switch(ca-trustpoint)#enrollment terminal Core-Switch(config)#ip http secure-trustpoint Core-Switch

   Show answer

   Answer: C

   Explanation

   love questions about topics not covered in blueprint and OCG. another answer to remebmer. thats why dumps are 100% justified. thank you examtopics.

   Source: Adapted from community discussion — ihateciscoreally

   References

   • Cisco documentation
   • cisco.com documentation

   Next question

4. Question 384 · 1003 in bank

   An engineer must create a new SSID on a Cisco 9800 wireless LAN controller. The client has asked to use a pre-shared key for authentication. Which profile must the engineer edit to achieve this requirement?

   • APolicy
   • BRF
   • CFlex
   • DWLAN

   Show answer

   Answer: D

   Explanation

   Navigate to Configuration > Wireless > WLANs > WLAN name > Security > Layer2 , and fix the password. https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213970-catalyst-9800-wireless-controllers-commo.html#:~:text=Navigate%20to%C2%A0%C2%A0Configuration%20%3E%20Wireless%20%3E%20WLANs%20%3E%20WLAN%20name%20%3E%20Security%20%3E%20Layer2%C2%A0%2C%C2%A0and%20fix%20the%20password.

   Source: Adapted from community discussion — Asymptote

   References

   • Cisco documentation
   • Cisco documentation
   • Cisco documentation

   Next question

5. Question 385 · 1003 in bank

   An engineer is configuring a new SSID to present users with a splash page for authentication. Which WLAN Layer 3 setting must be configured to provide this functionality?

   • ALocal Policy
   • BWPA2 Policy
   • CCCKM
   • DWeb Policy

   Show answer

   Answer: D

   Explanation

   https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/100787-splash-page-redirect.html D is correct, step 12 "Check the Web Policy box, and then click the Splash Page Web Redirect radio button." Image clearly show Layer 3 settigs --> Web Policy

   Source: Adapted from community discussion — yeyuno

   References

   • Cisco documentation

   Next question

6. Question 386 · 1003 in bank

   A customer requests a design that includes GLBP as the FHRP. The network architect discovers that the members of the GLBP group have different throughput capabilities. Which GLBP load balancing method supports this environment?

   • Around robin
   • Bhost dependent
   • Cweighted
   • Dleast connection

   Show answer

   Answer: C

   Explanation

   Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ip-services/product_data_sheet0900aecd803a546c.html

   Source: Adapted from community discussion — kebkim

   Next question

7. Question 387 · 1003 in bank

   

   Refer to the exhibit. Which command set changes the neighbor state from Idle (Admin) to Active?

   • AR1(config)#router bgp 65001 R1(config-router)#neighbor 192.168.50.2 remote-as 65001
   • BR1(config)#router bgp 65001 R1(config-router)#neighbor 192.168.50.2 activate
   • CR1(config)#router bgp 65001 R1(config-router)#no neighbor 192.168.50.2 shutdown
   • DR1(config)#router bgp 65002 R1(config-router)#neighbor 192.168.50.2 activate

   Show answer

   Answer: C

   Explanation

   ISP(config-router)#do sh ip bgp sum BGP router identifier 2.2.2.2, local AS number 65000 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 192.168.50.2 4 65001 0 0 1 0 0 never Idle (Admin) ISP(config-router)#no neighbor 192.168.50.2 shutdown ISP(config-router)#do sh ip bgp sum BGP router identifier 2.2.2.2, local AS number 65000 Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 192.168.50.2 4 65001 0 0 1 0 0 never Idle

   Source: Adapted from community discussion — Colmenarez

   Next question

8. Question 388 · 1003 in bank

   A network engineer configures a WLAN controller with increased security for web access. There is IP connectivity with the WLAN controller, but the engineer cannot start a management session from a web browser. Which action resolves the issue?

   • ADisable Adobe Flash Player.
   • BUse a private or incognito session.
   • CUse a browser that supports 128-bit or larger ciphers.
   • DDisable JavaScript on the web browser.

   Show answer

   Answer: C

   Explanation

   These are the questions that really irk me about Cisco. What if this was the one question that failed me? This has NOTHING to do with being a network engineer/administrator. This is more of a desktop application troubleshooting question. Call me oldschool but in my opinion CCNP should be straight up Routing/Switching/QoS/Firewall/*some cloud* Not this garbage

   Source: Adapted from community discussion — mgiuseppe86

   Next question

9. Question 389 · 1003 in bank

   Which statement about Cisco Express Forwarding is true?

   • AThe CPU of a router becomes directly involved with packet-switching decisions.
   • BIt uses a fast cache that is maintained in a router data plane.
   • CIt maintains two tables in the data plane: the FIB and adjacency table.
   • DIt makes forwarding decisions by a process that is scheduled through the IOS scheduler.

   Show answer

   Answer: C

   Explanation

   https://www.fir3net.com/Routers/Cisco/what-is-cef-cisco-express-forwarding.html CEF is built around 2 main components - the Forwarding Information Base (FIB) and the Adjacency Table. Answer, C

   Source: Adapted from community discussion — DJOHNR

   References

   • Cisco documentation

   Next question

10. Question 390 · 1003 in bank

    A customer requests a network design that supports these requirements: ✑ FHRP redundancy ✑ multivendor router environment ✑ IPv4 and IPv6 hosts Which protocol does the design include?

    • AVRRP version 2
    • BVRRP version 3
    • CGLBP
    • DHSRP version 2

    Show answer

    Answer: B

    Explanation

    HSRP and GLBP are Cisco propietary, so they won't work in a multivendor setup. VRRPv3 us multivendor and supports IPv4 and 6.

    Source: Adapted from community discussion — Jheax

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

350-401 practice, question 381. 1003 questions available.