Question 261 · 450 in bank
What is the default TCP port for SIP OAuth made in Cisco UCM?
Show answer
Answer: B
Implementing Cisco Collaboration Core Technologies (CLCOR)450 questions across 45 pages are complete and free, with no account or card.
450 questions in this bank
Free access · progress saved on this device
What is the default TCP port for SIP OAuth made in Cisco UCM?
Answer: B
What is a capability of the call forwarding feature in a Cisco Webex dial plan?
Answer: D
Checked this doc: https://help.webex.com/en-us/article/4efsep/Configure-call-forwarding#call-forwarding-in-userhub I don't think it's A since it's refrring to Webex meetings, not calls. It can't be B because if call waiting is active, calls are not forwarded. C almost seems ok, but talks about forwarding calls to the "voicemail of a mobile phone", when the doc refers to internal phones instead ("This option is only available for selection if you've entered a valid internal phone number with voicemail service enabled"). D matches what the doc says under "Forward all calls": "Select Play a brief tone for forwarded calls to play a brief tone whenever a call is forwarded", so going with that.
Source: Adapted from community discussion — TheBabu
Which command enables SIP OAuth mode on a Cisco UCM publisher node?
Answer: B
Enable SIP OAuth Mode Use the Command Line Interface to enable SIP OAuth mode. Enabling this feature on the publisher node also enables the feature on all cluster nodes. Procedure Step 1 On the Unified Communications Manager publisher node, log in to the Command Line Interface. Step 2 Run the utils sipOAuth-mode enable CLI command.
Source: Adapted from community discussion — bpgotcha
An engineer must deploy the Cisco Webex app to a Virtual Desktop Infrastructure (VDI) environment and support full-featured meetings. Which action must the engineer take to meet these requirements?
Answer: B
Answer B Install Webex Meetings VDI plugin on thin client systems For full featured meetings with Webex App: On Windows or MacOS thin clients, install the bundled (App + Meetings) plugin. On Linux thin clients, install the separate Meetings VDI plugin after installing the separate App VDI plugin. https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/wbxt/vdi/wbx-vdi-deployment-guide/wbx-teams-vdi-deployment_chapter_010.html#Cisco_Task_in_List_GUI.dita_6ca8c516-cd1e-45c4-a33b-766da846195f
Source: Adapted from community discussion — dbayt
Where is Directory Connector hosted in a Cisco Webex Hybrid Services deployment?
Answer: D
On a Cisco Catalyst Switch, which command is required to send CDP packets on a switch port that configures a Cisco IP phone to transmit voice traffic in 802.1Q frames, tagged with the voice VLAN ID 221?
Answer: C
C is correct : switchport voice vlan {vlan-id | • vlan-id—Configure the phone to forward all voice traffic through the specified VLAN. By default, the Cisco IP Phone forwards the voice traffic with an IEEE 802.1Q priority of 5. Valid VLAN IDs are 1 to 4094.
Source: Adapted from community discussion — Panda_man
An engineer troubleshoots an outbound call failure on an ISDN-PRI circuit. The engineer is suspecting the error “Incompatible Destination”. Which debugs or commands are run in the voice gateway to troubleshoot the issue?
Answer: C
An engineer must configure DTMF relay on a Cisco Unified Border Element by using RFC2833 as the preferred relay mechanism and KPML as the next preferred relay mechanism. The engineer logs in to the CUBE and enters the dial-peer configuration level. Which command should be run at the dial-peer configuration level?
Answer: D
The chief technology officer at a company must reduce collaboration infrastructure costs by onboarding all on-premises equipment to the cloud by using Cisco Webex Control Hub. Administrators need the ability to manage upgrades and set up hot desking for on-premises devices. Which action must be taken before onboarding devices by using the Control Hub?
Answer: B
Prerequisites: Software version CE9.15 or later. Encrypted version of CE software. Control Hub access as a device or org admin. You need to have IP addresses, usernames, and passwords for all the devices that you want to migrate. HTTPS connectivity to your devices for the Device Connector tool. Source: https://help.webex.com/en-us/article/nutc0dy/Cloud-onboarding-for-Board,-Desk,-and-Room-Series
Source: Adapted from community discussion — ronaie
An engineer is deploying the Webex app on a Microsoft Windows computer that has multiple user accounts. Which CLI argument allows the engineer to install the application as a “per machine” installation?
Answer: B
https://help.webex.com/en-us/article/nw5p67g/Webex-App-%7C-Installation-and-automatic-upgrade#Cisco_Reference.dita_de4f9295-316d-4e1c-8f47-329ddfdb984d "When you set ALLUSERS=1 to specify a per computer installation, you must have administration access privileges. See https://docs.microsoft.com/en-us/windows/win32/msi/allusers for more details."
Source: Adapted from community discussion — john_doe_9999
Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page
350-801 practice, question 261. 450 questions available.
Version 1.0.0. How we source questions