350-801 practice questions 251–260

1. Question 251 · 450 in bank

   The enterprise network is migrating to a global dial plan and running a few devices in the test phase. Which change is performed by the system to the information dialed when the Cisco UCM endpoint dials an external destination under a global dial plan?

   • AThe calling party is globalized using translation patterns
   • BThe normalization script modifies the calling party
   • CThe destination is transformed using site-specific route patterns
   • DThe destination is globalized using translation patterns to normalize the called party

   Show answer

   Answer: D

   Explanation

   Confirming D. Per Cisco documentation: Cisco Unified Communications Manager uses various number patterns, such as route patterns or translation patterns, along with the value for the Calling Party Number Type to globalize a phone number. For example, you can configure Cisco Unified Communications Manager to take a localized German phone number of 069XXXXXXX with a Subscriber calling party number type and globalize it to +49 40 69XXXXXXX, which includes the German country code and city code. https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_5_1SU3/systemConfig/cucm_b_system-configuration-guide-1251su3/cucm_mp_ca9d6574_00_calling-party-normalization12-0.pdf

   Source: Adapted from community discussion — MaxG

   References

   • Cisco documentation

   Next question

2. Question 252 · 450 in bank

   Which Webex Calling construct is used to organize calling features within physical site?

   • Aclient settings
   • Bservice settings
   • Clocations
   • Dcall routing

   Show answer

   Answer: C

   Next question

3. Question 253 · 450 in bank

   Which option must be used when configuring the Local Gateway for a Cisco Webex Calling trunk?

   • AOAuth-based
   • Bmutual TLS
   • Clocal authentication
   • Dcertificate-based

   Show answer

   Answer: D

   Next question

4. Question 254 · 450 in bank

   Select 2

   What are two access management mechanisms in Cisco Webex Control Hub? (Choose two.)

   • Aattribute-based access control
   • Bmultifactor authentication
   • Csingle sign-on with Google
   • DClient ID/Client Secret
   • EActive Directory synchronization

   Show answer

   Answer: BE

   References

   • Cisco documentation

   Next question

5. Question 255 · 450 in bank

   

   Refer to the exhibit A company recently deployed Cisco Jabber. Users log in to Jabber by using their email address in a domain named company.com. The users report that they cannot register their Jabber telephony services when working from home unless they use a VPN. An engineer runs the DNS lookup tool in Cisco Expressway-C to troubleshoot the issue. What is the cause of the issue?

   • AThe TTL value for the company.com domain is too short.
   • BThere is a missing SRV record entry for the company.com domain.
   • CThe company.com domain must be resolved only in Expressway-E.
   • DThere must be only one response for the company.com domain.

   Show answer

   Answer: B

   Next question

6. Question 256 · 450 in bank

   Which service must be enabled when LDAP on Cisco UCM is used?

   • ACisco Bulk Provisioning Service
   • BCisco AXL Web Service
   • CCisco CallManager SNMP Service
   • DCisco DirSync

   Show answer

   Answer: D

   Explanation

   Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide- imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_01000.html

   Next question

7. Question 257 · 450 in bank

   What an advantage of using of the SIP OAuth mode in Cisco Jabber?

   • Ausage of self-signed certificates
   • Bsecure signaling and media
   • Cauthentication of SIP messages
   • Dreduced authentication times

   Show answer

   Answer: B

   Explanation

   Key benefits of the SIP OAuth mode support for Cisco Jabber: Enables always-on encryption without additional admin burden. Secure signaling and media for Cisco Jabber without the need of Mixed mode (no CTL updates, certificates maintenance, and so on) No need to install and maintain the LSC on Jabber clients.

   Source: Adapted from community discussion — a3c4c84

   Next question

8. Question 258 · 450 in bank

   An engineer must enable onboarding of on-premises devices by using activation codes to a Cisco UCM server The engineer activated the Cisco Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?

   • AGenerate 16-digit codes by using the Bulk Administration Tool.
   • BSet the Enable Activation Code enterprise parameter to True.
   • CCreate a Bulk Administration Tool provisioning template.
   • DManually provision new phones that have an activation code requirement.

   Show answer

   Answer: C

   References

   • Cisco documentation
   • Cisco documentation

   Next question

9. Question 259 · 450 in bank

   Select 2

   An engineer must deploy the Cisco Webex app to a Windows Virtual Desktop Infrastructure environment that has a roaming database named spark_roaming_store.db stored in a user’s AppData\Roaming directory. Which two command-line arguments must be used when running the installer? (Choose two.)

   • AALLUSERS=0
   • BENABLEVDI=1
   • CALLUSERS=1
   • DENABLEVDI=2
   • EROAMINGENABLED=1

   Show answer

   Answer: CE

   Explanation

   https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/wbxt/vdi/wbx-vdi-deployment-guide/wbx-teams-vdi-deployment_chapter_010.html#id_127338 ROAMINGENABLED=1 If this argument is specified, then the roaming database (spark_roaming_store.db) is stored in the user's roaming directory (AppData\Roaming). Otherwise the roaming database is stored in AppData\Local. This argument must be accompanied by ALLUSERS=1, otherwise the ROAMINGENABLED argument is ignored.

   Source: Adapted from community discussion — dirkske78

   References

   • Cisco documentation

   Next question

10. Question 260 · 450 in bank

    What is a capability of a Cisco IOS XE media resource?

    • AIt provides a hardware conferencing solution.
    • BIt provides a voice packet optimization solution.
    • CIt provides call forwarding capabilities.
    • DIt provides redundancy for voice calls.

    Show answer

    Answer: A

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

350-801 practice, question 251. 450 questions available.