2V0-41.24 practice questions 71–80

1. Question 71 · 83 in bank

   How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

   • AAutomatically created when Tier-1 is created.
   • BManually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
   • CManually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
   • DAutomatically created when Tier-1 is connected with Tier-0 from NSX UI.

   Show answer

   Answer: D

   Next question

2. Question 72 · 83 in bank

   Select 2

   Which two of the following parameters are required for deploying the NSX Application Platform? (Choose two.)

   • AInterface Name
   • BUpload XML File
   • CCluster Format Type
   • DInterface Service Name
   • EUpload Kubernetes Configuration File

   Show answer

   Answer: CE

   Next question

3. Question 73 · 83 in bank

   Select 3

   Which three of the following describe the Border Gateway Routing Protocol (BGP) configuration on a Tier-0 Gateway? (Choose three.)

   • AIt supports a 4-byte autonomous system number.
   • BCan be used as an Exterior Gateway Protocol.
   • CThe network is divided into areas that are logical groups.
   • DEIGRP is disabled by default.
   • EBGP is enabled by default.

   Show answer

   Answer: ABE

   Next question

4. Question 74 · 83 in bank

   Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

   • Aset timezone
   • Bset ntp-server
   • Cget timezone
   • Dget time-server

   Show answer

   Answer: B

   Next question

5. Question 75 · 83 in bank

   What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

   • AVLAN Uplink
   • BDownlink interface
   • CLoopback Router Port
   • DService interface

   Show answer

   Answer: D

   Next question

6. Question 76 · 83 in bank

   An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP. Which is the correct way to implement this change?

   • ASend an API call to https://<nsx-mgr>/api/vl/cluster/api-certificate?action=set_cluster_certificate&certificate_id=<certificate_id>
   • BSend an API call to https://<nsx-mgr>/api/vl/node/services/http?action=apply_certificate&certificate_id=<certificate_id>
   • CSSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install <certificate_id>
   • DSSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install <certificate_id>

   Show answer

   Answer: A

   References

   • techdocs.broadcom.com documentation

   Next question

7. Question 77 · 83 in bank

   The security administrator turns on logging for a firewall rule. Where is the log stored on an ESXi transport node?

   • A/var/log/messages.log
   • B/var/log/vmware/nsx/firewall.log
   • C/var/log/fw.log
   • D/var/log/dfwpktlogs.log

   Show answer

   Answer: D

   Next question

8. Question 78 · 83 in bank

   An administrator needs to download the support bundle for NSX Manager. Where does the administrator download the log bundle from?

   • ASystem > Support Bundle
   • BSystem > Settings
   • CSystem > Utilities > Tools
   • DSystem > Settings > Support Bundle

   Show answer

   Answer: A

   Explanation

   To download the support bundle for NSX Manager, the administrator navigates to the System tab in the NSX Manager web interface and selects Support Bundle. This is where the option to generate and download the log bundle for troubleshooting is located.

   Source: Adapted from community discussion — electro165

   References

   • techdocs.broadcom.com documentation

   Next question

9. Question 79 · 83 in bank

   Select 2

   Which two statements are true for IPSec VPN? (Choose two.)

   • AIPSec VPN services can be configured at Tier-0 and Tier-1 gateways.
   • BDynamic routing is supported for any IPSec mode in NSX.
   • CIPSec VPNs use the DPDK accelerated performance library.
   • DVPNs can be configured on the command line interface on the NSX manager.

   Show answer

   Answer: AC

   Next question

10. Question 80 · 83 in bank

    An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager?

    • Aset cli-timeout 1
    • Bset cli-timeout enabled
    • Cset cli-timeout disabled
    • Dset cli-timeout 0

    Show answer

    Answer: D

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

2V0-41.24 practice, question 71. 83 questions available.