AZ-801 practice questions 231–239

1. Question 231 · 239 in bank

   HOTSPOT - You need to configure BitLocker on Server4. On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Reference: https://docs.microsoft.com/en-us/windows-server/storage/refs/refs-overview https://docs.microsoft.com/en-us/powershell/module/bitlocker/enable-bitlockerautounlock?view=windowsserver2022-ps

   Source: Adapted from community discussion — GoforIT21

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

2. Question 232 · 239 in bank

   HOTSPOT - What is the effective minimum password length for User1 and Admin1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: 9 - When multiple PSOs apply to a user, the PSO with the highest precedence (lowest precedence number) applies which in this case is PSO1. Box 2: 8 - There are no PSOs applied to Admin1 so the password policy from the Default Domain GPO applies. The Minimum password length setting in GPO1 would only apply to local user accounts on computers in OU1. It does not apply to domain user accounts.

   Source: Adapted from community discussion — TakingExams_Forever

   

   Next question

3. Question 233 · 239 in bank

   HOTSPOT - For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Not True, the policy description doesn't state anything about it only denying SMB connections and upon testing this in my lab I receive the following error when trying to RDP to the server where I activated this policy: "The system administrator has restricted the types of logon (network or interactive) that you may use. For assistance, contact your administrator or technical support." The original answer is therfor correct: NYN https://learn.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/deny-access-to-this-computer-from-the-network

   Source: Adapted from community discussion — neusaap

   References

   • Microsoft Learn

   

   Next question

4. Question 234 · 239 in bank

   HOTSPOT - With which servers can Server1 and Server3 communicate? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Correct: Server1: Request inbound and outbound: Connections are authenticated if possible, but the connections are allowed if authentication fails. Server 3: Require inbound and outbound Only connections that are authenticated are allowed. Server 4 has no connection rules so isn't authenticated, therefore it will be allowed to contact Server 1. So Server 1 can contact 2,3,4 (2&3 are on the domain and have connection rules so they're fine) As Server 3 requires inbound/outbound, it cannot authenticate IPSec with server 4, therefore it can only talk to Server 1 + 2. source: https://forsenergy.com/en-us/authfw/html/13da39e0-2a32-4ac4-a952-4391ae88c739.htm

   Source: Adapted from community discussion — musmas82473

   

   Next question

5. Question 235 · 239 in bank

   You are planning the migration of Archive1 to support the on-premises migration plan. What is the minimum number of IP addresses required for the node and cluster roles on Cluster3?

   • A2
   • B3
   • C4
   • D5

   Show answer

   Answer: B

   Explanation

   https://learn.microsoft.com/en-us/windows-server/failover-clustering/create-failover-cluster#create-a-failover-cluster-by-using-windows-powershell The following example creates a failover cluster that is named MyCluster with nodes Server1 and Server2, assigns the static IP address 192.168.1.12, and adds all eligible storage to the failover cluster New-Cluster –Name MyCluster –Node Server1, Server2 –StaticAddress 192.168.1.12 Answer is B

   Source: Adapted from community discussion — syu31svc

   References

   • Microsoft Learn

   Next question

6. Question 236 · 239 in bank

   You are evaluating technical requirements for Cluster 2. What is the minimum number of Azure Site Recovery Providers that you should install?

   • A1
   • B4
   • C12
   • D16

   Show answer

   Answer: B

   Explanation

   You install the Azure Site Recovery Provider and Recovery Services agent on each standalone Hyper-V host, or on each Hyper-V cluster node.

   Source: Adapted from community discussion — wyindualizer

   Next question

7. Question 237 · 239 in bank

   You need to back up Server 4 to meet the technical requirements. What should you do first?

   • ADeploy Microsoft Azure Backup Server (MABS).
   • BConfigure Windows Server Backup.
   • CInstall the Microsoft Azure Recovery Services (MARS) agent.
   • DConfigure Storage Replica.

   Show answer

   Answer: C

   Explanation

   The MARS agent Azure Backup uses the MARS agent to back up data from on-premises machines and Azure VMs to a backup Recovery Services vault in Azure. The MARS agent can: Run on on-premises Windows machines so that they can back up directly to a backup Recovery Services vault in Azure. https://learn.microsoft.com/en-us/azure/backup/backup-support-matrix-mars-agent

   Source: Adapted from community discussion — musmas82473

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

8. Question 238 · 239 in bank

   You need to meet the technical requirements for Cluster3. What should you include in the solution?

   • AEnable integration services on all the virtual machines.
   • BConfigure a fault domain doe the cluster.
   • CAdd a failover cluster role.

   Show answer

   Answer: C

   Next question

9. Question 239 · 239 in bank

   DRAG DROP - You need to meet the technical requirements for Cluster2. Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Reference: https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-tutorial

   Source: Adapted from community discussion — syu31svc

   

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-801 practice, question 231. 239 questions available.