AZ-801 practice questions 161–170

1. Question 161 · 239 in bank

   HOTSPOT - You have three servers named Host1, Host2, and VM1 that run Windows Server. Host1 and Host2 have the Hyper-V server role installed. VM1 is a virtual machine hosted on Host1. You configure VM1 to replicate to Host2 by using Hyper-V Replica. Which types of failovers can you perform on VM1 on each host? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Test failover - only option for running vm Planned failover - for second answer ================ Options are planned failover - then test or unplanned are both only done from the secondary replica side Failover is just failover- not a test- should br planned or unplanned!!! This is the first answer https://learn.microsoft.com/en-us/virtualization/community/team-blog/2012/20120731-types-of-failover-operations-in-hyper-v-replica-part-ii-planned-failover https://learn.microsoft.com/en-us/virtualization/community/team-blog/2012/20120725-types-of-failover-operations-in-hyper-v-replica-part-i-test-failover https://learn.microsoft.com/en-us/virtualization/community/team-blog/2012/20120808-types-of-failover-operations-in-hyper-v-replica-part-iii-unplanned-failover

   Source: Adapted from community discussion — joehoesofat

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

2. Question 162 · 239 in bank

   You have three Azure virtual machines named VM1, VM2, and VM3 that host a multitier application. You plan to implement Azure Site Recovery. You need to ensure that VM1, VM2, and VM3 fail over as a group. What should you configure?

   • Aan availability zone
   • Ba recovery plan
   • Can availability set

   Show answer

   Answer: B

   Explanation

   Correct Answer "Using recovery plans, you can customize and sequence the failover and recovery of multi-tier applications running on multiple VMs. "

   Source: Adapted from community discussion — xxxxx85xx

   References

   • Microsoft Learn

   Next question

3. Question 163 · 239 in bank

   DRAG DROP - You have an Azure subscription that contains an Azure Recovery Services vault. You have an on-premises physical server that runs Windows Server. You need to back up the server daily to Azure. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Reference: https://docs.microsoft.com/en-us/azure/backup/tutorial-backup-windows-server-to-azure

   Source: Adapted from community discussion — WMG

   

   Next question

4. Question 164 · 239 in bank

   DRAG DROP - Your network contains an Active Directory Domain Services (AD DS) domain that has the Active Directory Recycle Bin enabled. The domain contains two domain controllers named DC1 and DC2. The system state of the domain controllers is backed up daily at 23:00 by using Windows Server Backup. You have an organizational unit (OU) named ParisUsers that contains 1,000 users. At 08:00, DC1 shuts down for hardware maintenance. The maintenance completes, but DC1 remains shut down. At 09:00, an administrative error causes the manager attribute of each user in ParisUsers to be deleted. You need to recover the user account details as quickly as possible. The solution must minimize data loss. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Two requirements make this proposed answer incorrect. First, you are being asked to minimize data loss. So restoring from 2300 the previous night as opposed to an hour old isn't minimizing data loss. Second, you're asked to get this fixed as quickly as possible. If you've ever done a system state restore on a DC with a lot of object, it's takes a long time. So: Boot into DSRM Authoritative restore Boot normally Is the only answer that makes sense

   Source: Adapted from community discussion — arnitjoe

   References

   • Microsoft Learn

   

   Next question

5. Question 165 · 239 in bank

   DRAG DROP - You manage 200 physical servers that run Windows Server. You plan to migrate the servers to Azure. You need to prepare for discovery of the servers by using Azure Migrate. Which three actions should you perform in sequence on a physical server? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Reference: https://docs.microsoft.com/en-us/azure/migrate/tutorial-discover-physical

   Source: Adapted from community discussion — jimmyjose

   References

   • Microsoft Learn

   

   Next question

6. Question 166 · 239 in bank

   Select 2

   You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed. You import the Azure Migrate appliance as VM1. You need to register VM1 with Azure Migrate. What should you do in Azure Migrate? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • ACreate a project.
   • BAdd a migration tool.
   • CAdd an assessment tool.
   • DGenerate a project key.
   • EDownload the Azure Migrate installer script ZIP file.

   Show answer

   Answer: AD

   Explanation

   https://learn.microsoft.com/en-us/azure/migrate/tutorial-migrate-hyper-v?tabs=UI Go to the already created project or create a new project. https://learn.microsoft.com/en-us/azure/migrate/how-to-set-up-appliance-hyper-v Configure the appliance for the first time, and register it with the project using the project key Would go for A & D

   Source: Adapted from community discussion — syu31svc

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

7. Question 167 · 239 in bank

   You have two servers that run Windows Server as shown in the following table.

   

   You need to copy the contents of volume E from Server1 to Server2. The solution must meet the following requirements: ✑ Ensure that files in-use are copied. ✑ Minimize administrative effort. What should you use?

   • AStorage Migration Service
   • BAzure File Sync
   • CAzure Backup
   • DStorage Replica

   Show answer

   Answer: C

   Explanation

   How can the answer be Storage Migration Service when it does not satisfy the requirement of copying files in-use? "The Storage Migration Service doesn't migrate files that applications exclusively lock". Same reason NOT Azure File Sync - Files in-use are not copied, sync resumes when files are closed. Azure Backup is based on VSS and can copy open files, and so does Storage Replica - "it does replicate in-use or open files" . Storage Replica has to be within the same AD Forest. I don´t think it's legit to say that you can just add Server2 to the domain when it goes against the given scenario, and the solution does not include that. Therefore Answer is Azure Backup. Backup files using MARS and then restore them to Server2.

   Source: Adapted from community discussion — cris66

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

8. Question 168 · 239 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2. Sysvol replicates by using the File Replication Service (FRS). You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022. You need to ensure that you can add the first domain controller that runs Windows Server 2022. Solution: You migrate sysvol from FRS to Distributed File System (DFS) Replication. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   https://learn.microsoft.com/en-us/windows-server/storage/dfs-replication/migrate-sysvol-to-dfsr Domain controllers use a special shared folder named SYSVOL to replicate sign-in scripts and Group Policy object files to other domain controllers. Windows 2000 Server and Windows Server 2003 use the File Replication Service (FRS) to replicate SYSVOL. Windows Server 2008 uses the newer Distributed File System Replication (DFS Replication) service for domains that use the Windows Server 2008 domain functional level. Windows Server 2008 uses FRS for domains that run older domain functional levels. Answer is Yes

   Source: Adapted from community discussion — syu31svc

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

9. Question 169 · 239 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2. Sysvol replicates by using the File Replication Service (FRS). You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022. You need to ensure that you can add the first domain controller that runs Windows Server 2022. Solution: You upgrade the PDC emulator. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   Instead migrate sysvol from FRS to Distributed File System (DFS) Replication. Note: Do I need to change SYSVOL replication from FRS to DFS? If your domain is built based on Windows server 2008 or Windows Server 2008 R2, you are already using DFS for SYSVOL replication. If you originally migrated from Windows server 2003, it's more likely you are still using FRS. In that case, before migration, you need to change the SYSVOL replication method from FRS to DFS. Reference: https://www.rebeladmin.com/2021/09/step-by-step-guide-active-directory-migration-from-windows-server-2008-r2-to-windows-server-2022/

   Next question

10. Question 170 · 239 in bank

    Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. The functional level of the forest is Windows Server 2012 R2. All domain controllers run Windows Server 2012 R2. Sysvol replicates by using the File Replication Service (FRS). You plan to replace the existing domain controllers with new domain controllers that will run Windows Server 2022. You need to ensure that you can add the first domain controller that runs Windows Server 2022. Solution: You run the Active Directory Migration Tool (ADMT). Does this meet the goal?

    • AYes
    • BNo

    Show answer

    Answer: B

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-801 practice, question 161. 239 questions available.