Question 251 · 382 in bank
Which protocol runs between the vSmart controllers and WAN Edge routers when the vSmart controller acts like a route reflector?
Show answer
Answer: D
300-415ProfessionalCiscoAll questions freePage 26 of 39
300-415 practice questions 251–260
Implementing Cisco SD-WAN Solutions (ENSDWI)382 questions across 39 pages are complete and free, with no account or card.
Official study references
382 questions in this bank
Free access · progress saved on this device
Question 252 · 382 in bank
Which protocol does vManage use to provision the WAN Edge device during the onboarding process?
Show answer
Answer: B
Question 253 · 382 in bank
What is the BFD multiplier in application-aware routing?
Show answer
Answer: A
Explanation
To determine the SLA classification of a tunnel, application-aware routing uses the loss, latency, and jitter information from the latest poll intervals. The number of poll intervals used is determined by a multiplier. By default, the multiplier is 6, so the information from all the poll intervals (specifically, from the last six poll intervals) is used to determine the classification. Reference: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/policies/ios-xe-17/policies-book-xe/application-aware-routing.html
Source: Adapted from community discussion — [Removed]
References
Question 254 · 382 in bank
Which platform is a Cisco SD-WAN virtual platform?
Show answer
Answer: C
Question 255 · 382 in bank
What is a requirement for deployment of on-premises vBond controllers through the Cisco Plug and Play Connect process?
Show answer
Answer: C
Explanation
C. Internet connectivity from vManage The requirement for deployment of on-premises vBond controllers through the Cisco Plug and Play Connect process is Internet connectivity from vManage (Option C). The Cisco Plug and Play Connect process is used to establish secure connectivity between the vManage Network Management system and the vBond orchestrators, which are responsible for authenticating and orchestrating the control plane connections between vSmart controllers and vEdge routers. For this process to work, the vManage system must have Internet connectivity to reach and communicate with the vBond orchestrators during the initial deployment and configuration phase.
Source: Adapted from community discussion — iking
Question 256 · 382 in bank
Which component of the Cisco SD-WAN control plane architecture facilitates the storage of certificates and configurations for network components?
Show answer
Answer: C
Explanation
I thought this site was updated when there was new questions? I keep seeing posts on here that there is alot of new questions.
Source: Adapted from community discussion — nbvolz
Question 257 · 382 in bank
How is vBond reachability resolved by vManage?
Show answer
Answer: B
Question 258 · 382 in bank
Refer to the exhibit. A user has selected the options while configuring a VPN Interface Ethernet feature template. What is the required configuration parameter the user must set in this template for this feature to function?
Show answer
Answer: C
Explanation
Example: Configure a Device as a Spoke sdwan interface GigabitEthernet0/0/2 tunnel-interface encapsulation ipsec color public-internet restrict tunnel-qos spoke exit bandwidth-downstream 50000 exit https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qos-book/per-tunnel-qos.html#Cisco_Concept.dita_e0edbba2-9450-4816-9aa0-46e7a7d78e86
Source: Adapted from community discussion — Tas2000
References
Question 259 · 382 in bank
What is a key element used in a vBond Orchestrator redundancy topology?
Show answer
Answer: C
References
Question 260 · 382 in bank
Which signature sets are available in vManage under the security policy configuration for IPS?
Show answer
Answer: A
References
Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page
300-415 practice, question 251. 382 questions available.
About this question bank
Version 1.0.0. How we source questions