Question 51 · 99 in bank
Which vSphere feature protects against host hardware failures by restarting virtual machines (VMs) on hosts that are running in the cluster?
Show answer
Answer: D
1V0-21.20FoundationalVMwareAll questions freePage 6 of 10
1V0-21.20 practice questions 51–60
VMware vSphere 7.x Associate (VCTA-DCV)99 questions across 10 pages are complete and free, with no account or card.
Official study references
99 questions in this bank
Free access · progress saved on this device
Question 52 · 99 in bank
A VSphere operator can only configure up to two virtual CPUs when deploying a new virtual machine (VM).
What is the cause of this situation?
Show answer
Answer: A
Explanation
I think it's A "A virtual machine cannot have more virtual CPUs than the number of logical cores on the host. The number of logical cores is equal to the number of physical cores if hyperthreading is deactivated or two times that number if hyperthreading is activated."
Source: Adapted from community discussion — magetrip
References
Question 53 · 99 in bank
Which file system protocol is supported by vSphere?
Show answer
Answer: D
References
Question 54 · 99 in bank
Which configuration setting ensures that virtual networks on a virtual switch are isolated from each other?
Show answer
Answer: A
Explanation
"Virtual LANs (VLANs) enable a single physical LAN segment to be further isolated so that groups of ports are isolated from one another as if they were on physically different segments." See here: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.networking.doc/GUID-7225A28C-DAAB-4E90-AE8C-795A755FBE27.html
Source: Adapted from community discussion — jplibre
References
Question 55 · 99 in bank
What is a benefit of VMware vSphere Storage APIs - Data Protection?
Show answer
Answer: D
Explanation
D is correct: What is VMware vSphere Storage APIs – Data Protection? VMware vSphere Storage APIs – Data Protection is the next generation of VMware’s data protection framework originally introduced in vSphere 4.0 that enables backup products to do centralized, efficient, off-host LAN free backup of vSphere virtual machines.
Source: Adapted from community discussion — robbie_the_menace
Question 56 · 99 in bank
Select 2Which two configuration options can only be enabled on distributed switches? (Choose two.)
Show answer
Answer: AC
Explanation
A. Port Mirroring and C. NetFlow can only be enabled on distributed switches in vSphere. Port Mirroring, also known as network monitoring or span, allows you to copy network traffic from a virtual switch port to another virtual switch port for analysis purposes. This feature is only available on distributed switches in vSphere. NetFlow is a network protocol used for collecting, aggregating, and recording traffic flow data in a network. NetFlow is used to monitor network traffic and can be used to identify network performance issues or security incidents. In vSphere, NetFlow is only available on distributed switches. B. VLAN IDs, D. NIC Teaming, and E. Load Balancing can be enabled on both standard and distributed switches in vSphere. These features allow you to configure virtual networks, team network adapters for increased reliability, and balance network traffic across multiple physical adapters.
Source: Adapted from community discussion — dinosan
Question 57 · 99 in bank
An administrator has observed an alert message in the vSphere UI related to a host's storage sensor hardware. Where should the administrator look for more information related to this alert?
Show answer
Answer: B
References
Question 58 · 99 in bank
An administrator has applied a Service 2 patch after taking a snapshot. The administrator then realizes that a Service 1.5 patch should have been applied before the Service 2 patch. Refer to the exhibit:
Which series of actions should be taken to manage this issue?
Show answer
Answer: D
Explanation
The correct approach in this scenario is option D: Revert to Service 1, take a snapshot, and apply the Service 1.5 patch. Let’s break down the reasoning behind this choice: Revert to Service 1: Since the administrator realizes that the Service 1.5 patch should have been applied before the Service 2 patch, it’s best to revert to the state before the Service 2 patch was applied. This means rolling back to Service 1. Take a snapshot: Before making any changes, take a snapshot of the current state. This snapshot will serve as a backup in case anything goes wrong during the patching process. Apply the Service 1.5 patch: After reverting to Service 1, apply the Service 1.5 patch. This ensures that the correct patch is now in place.
Source: Adapted from community discussion — jade33
Question 59 · 99 in bank
Which DRS score indicates that the virtual machine (VM) is experiencing severe resource contention?
Show answer
Answer: C
Explanation
0-20% Severe resource contention 20-40% Resource contention 40-60% Mild resource contention 60-80% No resource contention 80-100% Mild to no resource contention
Source: Adapted from community discussion — AasimOmer
Question 60 · 99 in bank
Refer to the exhibit:
An administrator deletes the Service 1.5 snapshot. What is the result of this action?
Show answer
Answer: C
Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page
1V0-21.20 practice, question 51. 99 questions available.
About this question bank
Version 1.0.0. How we source questions