AZ-500 practice questions 91–100

1. Question 91 · 496 in bank

   HOTSPOT - You have an Azure Container Registry named Registry1. You add role assignments for Registry1 as shown in the following table.

   

   Which users can upload images to Registry1 and download images from Registry1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: User1 and User4 only - Owner, Contributor and AcrPush can push images. Box 2: User1, User2, and User4 - All, except AcrImagineSigner, can download/pull images. Reference: https://docs.microsoft.com/bs-latn-ba/azure/container-registry/container-registry-roles

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

2. Question 92 · 496 in bank

   Select 2

   You have an Azure subscription. You create an Azure web app named Contoso1812 that uses an S1 App Service plan. You plan to - create a CNAME DNS record for www.contoso.com that points to Contoso1812. You need to ensure that users can access Contoso1812 by using the https://www.contoso.com URL. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • ATurn on the system-assigned managed identity for Contoso1812.
   • BAdd a hostname to Contoso1812.
   • CScale out the App Service plan of Contoso1812.
   • DAdd a deployment slot to Contoso1812.
   • EScale up the App Service plan of Contoso1812.
   • FUpload a PFX file to Contoso1812.

   Show answer

   Answer: BF

   Explanation

   B. Add a hostname to Contoso1812. F. Upload a PFX file to Contoso1812. Explanation: B: You can configure Azure DNS to host a custom domain for your web apps. For example, you can create an Azure web app and have your users access it using either www.contoso.com or contoso.com as a fully qualified domain name (FQDN). To do this, you have to create three records: A root "A" record pointing to contoso.com A root "TXT" record for verification A "CNAME" record for the www name that points to the A record F: To use HTTPS, you need to upload a PFX file to the Azure Web App. The PFX file will contain the SSL certificate required for HTTPS. References: https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom- domain

   Source: Adapted from community discussion — Orel123

   References

   • Microsoft Learn

   Next question

3. Question 93 · 496 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Sub1. You have an Azure Storage account named sa1 in a resource group named RG1. Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service. You need to revoke all access to sa1. Solution: You create a lock on sa1. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   B is the answer. https://learn.microsoft.com/en-us/rest/api/storageservices/define-stored-access-policy#modify-or-revoke-a-stored-access-policy To revoke a stored access policy, you can delete it, rename it by changing the signed identifier, or change the expiry time to a value in the past. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Changing the expiry time to a value in the past causes any associated signatures to expire. Deleting or modifying the stored access policy immediately affects all of the shared access signatures associated with it.

   Source: Adapted from community discussion — zellck

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

4. Question 94 · 496 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a hybrid configuration of Azure Active Directory (Azure AD). You have an Azure HDInsight cluster on a virtual network. You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication. Solution: You deploy Azure Active Directory Domain Services (Azure AD DS) to the Azure subscription. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   Azure AD domain Services is the only supported way for HD Insight cluster integration integration with active directory. so AAD connect to synchronise identities from an on-premises active directory to Azure AD and then Azure AD domain services for the HD Insights integration

   Source: Adapted from community discussion — PlasticMind

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

5. Question 95 · 496 in bank

   Select 2

   Your network contains an Active Directory forest named contoso.com. You have an Azure Active Directory (Azure AD) tenant named contoso.com. You plan to configure synchronization by using the Express Settings installation option in Azure AD Connect. You need to identify which roles and groups are required to perform the planned configuration. The solution must use the principle of least privilege. Which two roles and groups should you identify? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • Athe Domain Admins group in Active Directory
   • Bthe Security administrator role in Azure AD
   • Cthe Global administrator role in Azure AD
   • Dthe User administrator role in Azure AD
   • Ethe Enterprise Admins group in Active Directory

   Show answer

   Answer: CE

   Explanation

   Correct Answer as per provided link. In Express settings, the installation wizard asks for the following: AD DS Enterprise Administrator credentials Azure AD Global Administrator credentials

   Source: Adapted from community discussion — Solanki

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

6. Question 96 · 496 in bank

   DRAG DROP - You create an Azure subscription with Azure AD Premium P2. You need to ensure that you can use Azure Active Directory (Azure AD) Privileged Identity Management (PIM) to secure Azure AD roles. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Step: 2 Verify your identity by using multi-factor authentication (MFA) Click Verify my identity to verify your identity with Azure MF You'll be asked to pick an account. Step 3: Sign up PIM for Azure AD roles Once you have enabled PIM for your directory, you'll need to sign up PIM to manage Azure AD roles.

   Source: Adapted from community discussion — somenick

   References

   • Microsoft Learn

   

   Next question

7. Question 97 · 496 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a hybrid configuration of Azure Active Directory (Azure AD). You have an Azure HDInsight cluster on a virtual network. You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication. Solution: You deploy an Azure AD Application Proxy. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   Deploying Azure AD Application Proxy does not meet the goal of allowing users to authenticate to the Azure HDInsight cluster using their on-premises Active Directory credentials. Azure AD Application Proxy is used for securely publishing on-premises web applications to users outside the organization's network. It does not provide the necessary integration between Azure HDInsight and on-premises Active Directory for user authentication

   Source: Adapted from community discussion — Andre369

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

8. Question 98 · 496 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a hybrid configuration of Azure Active Directory (Azure AD). You have an Azure HDInsight cluster on a virtual network. You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials. You need to configure the environment to support the planned authentication. Solution: You deploy the On-premises data gateway to the on-premises network. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   No, deploying the On-premises Data Gateway does not meet the goal for allowing users to authenticate to the Azure HDInsight cluster using their on-premises Active Directory credentials. To enable Azure HDInsight to use on-premises Active Directory for authentication, you should set up Azure Active Directory Domain Services (Azure AD DS) or create a VPN or ExpressRoute connection between your on-premises network and Azure. Then, you can deploy Active Directory Domain Services (AD DS) on a virtual machine in the same virtual network as the HDInsight cluster, or use Azure AD DS to synchronize with your on-premises Active Directory.

   Source: Adapted from community discussion — codeunit

   References

   • Microsoft Learn

   Next question

9. Question 99 · 496 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure subscription named Sub1. You have an Azure Storage account named sa1 in a resource group named RG1. Users and applications access the blob service and the file service in sa1 by using several shared access signatures (SASs) and stored access policies. You discover that unauthorized users accessed both the file service and the blob service. You need to revoke all access to sa1. Solution: You regenerate the Azure storage account access keys. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   Yes, regenerating Azure storage account access keys is an effective way to revoke all existing access to the storage account. When you regenerate access keys, the old keys become invalid, which effectively denies access to all services associated with the account, including the blob service and file service.

   Source: Adapted from community discussion — flafernan

   Next question

10. Question 100 · 496 in bank

    HOTSPOT - You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

    

    Azure AD Privileged Identity Management (PIM) is used in contoso.com. In PIM, the Password Administrator role has the following settings: ✑ Maximum activation duration (hours): 2 ✑ Send email notifying admins of activation: Disable ✑ Require incident/request ticket number during activation: Disable ✑ Require Azure Multi-Factor Authentication for activation: Enable ✑ Require approval to activate this role: Enable ✑ Selected approver: Group1 You assign users the Password Administrator role as shown in the following table.

    

    For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

    

    This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

    Show the answer figure

    Answer: See figure below

    Explanation

    Box 1: Yes - Active assignments don't require the member to perform any action to use the role. Members assigned as active have the privileges assigned to the role at all times. Box 2: Yes - While Multi-Factor Authentication is disabled for User2 and the setting Require Azure Multi-Factor Authentication for activation is enabled, User2 can request the role but will need to enable MFA to use the role. Note: Eligible assignments require the member of the role to perform an action to use the role. Actions might include performing a multi-factor authentication (MFA) check, providing a business justification, or requesting approval from designated approvers. Box 3: No - User3 is Group1, which is a Selected Approver Group, however, self-approval is not allowed and someone else from group is required to approve the request. Reference: https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-resource-roles-assign-roles

    Source: Adapted from community discussion — zellck

    References

    • Microsoft Learn
    • Microsoft Learn
    • Microsoft Learn

    

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-500 practice, question 91. 496 questions available.