AZ-104 practice questions 211–220

1. Question 211 · 570 in bank

   HOTSPOT - You have an Azure subscription that contains a user named User1 and a storage account named storage1. The storage1 account contains the resources shown in the following table.

   

   User1 is assigned the following roles for storage1: • Storage Blob Data Reader • Storage Table Data Contributor • Storage File Data SMB Share Contributor For storage1, you create a shared access signature (SAS) named SAS1 that has the settings shown in the following exhibit. (Click the Exhibit tab.)

   

   To which resources can User1 write by using SAS1 and key1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   key1: folder1, container1, table1 SAS1: table1 I think that key 1 is the key of storage account which is created when creating storage account. Thus, it should be able to access all in storage account. SAS1 allows table only which is shown in the exhibit.

   Source: Adapted from community discussion — kamlau

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

2. Question 212 · 570 in bank

   HOTSPOT - You have an Azure subscription that contains the storage account shown in the following exhibit.

   

   Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Tested on Azure. My conclusion is: Max stored access policies: 3, because max total of stored access policy is 5 and we already have 2, so additional 3 available. Max immutable blob storage: 1, because max total of immutable blob storage policy is 2 - one Legal hold policy and one Time-based retention policy. We already have one, so additional 1 available.

   Source: Adapted from community discussion — HMKM

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

3. Question 213 · 570 in bank

   Select 3

   You have an Azure subscription that contains the resources in the following table.

   

   Store1 contains a file share named data. Data contains 5,000 files. You need to synchronize the files in the file share named data to an on-premises server named Server1. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • ACreate a container instance
   • BRegister Server1
   • CInstall the Azure File Sync agent on Server1
   • DDownload an automation script
   • ECreate a sync group

   Show answer

   Answer: BCE

   Explanation

   Correct Answer: B, C and E Step 1: Install the Azure File Sync agent on Server1. The Azure File Sync agent is a downloadable package that enables Windows Server to be synced with an Azure file share. Step 2: Register Server1. Register Windows Server with Storage Sync Service. Registering your Windows Server with a Storage Sync Service establishes a trust relationship between your server and the Storage Sync Service. Step 3: Create a sync group and a cloud endpoint. A sync group defines the sync topology for a set of files. Endpoints within a sync group are kept in sync with each other. A sync group must contain one cloud, which represents an Azure file share and one or more server endpoints. A server endpoint represents a path on registered server. Reference: https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide

   Source: Adapted from community discussion — mlantonis

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

4. Question 214 · 570 in bank

   You have an Azure subscription. The subscription contains a storage account named storage1 that has the lifecycle management rules shown in the following table.

   

   On June 1, you store a blob named File1 in the Hot access tier of storage1. What is the state of File1 on June 7?

   • Astored in the Cool access tier
   • Bstored in the Archive access tier
   • Cstored in the Hot access tier
   • Ddeleted

   Show answer

   Answer: D

   Explanation

   Sorry, the corect answer is D If you define more than one action on the same blob, lifecycle management applies the least expensive action to the blob. For example, action delete is cheaper than action tierToArchive. Action tierToArchive is cheaper than action tierToCool. https://learn.microsoft.com/en-us/azure/storage/blobs/lifecycle-management-overview

   Source: Adapted from community discussion — elior19940

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

5. Question 215 · 570 in bank

   HOTSPOT - You have an Azure subscription that contains the storage accounts shown in the following table.

   

   You need to identify which storage accounts support lifecycle management, and which storage accounts support moving data to the Archive access tier. Which storage accounts should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Correct 1 - storage1, storage2, storage3 Lifecycle management policies are supported for block blobs and append blobs in general-purpose v2, premium block blob, and Blob Storage accounts. 2 - storage2 Only storage accounts that are configured for LRS, GRS, or RA-GRS support moving blobs to the archive tier. The archive tier isn't supported for ZRS, GZRS, or RA-GZRS accounts. https://learn.microsoft.com/en-us/azure/storage/blobs/lifecycle-management-overview https://learn.microsoft.com/en-us/azure/storage/blobs/access-tiers-overview

   Source: Adapted from community discussion — yauhen_zd

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

6. Question 216 · 570 in bank

   HOTSPOT - You have an Azure subscription that contains a storage account named storage1. The storage1 account contains a container named container1. You create a blob lifecycle rule named rule1. You need to configure rule1 to automatically move blobs that were NOT updated for 45 days from contained to the Cool access tier. How should you complete the rule? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   1. daysAfterModificationGreaterThan 2. Blockblob https://learn.microsoft.com/en-us/azure/storage/blobs/lifecycle-management-overview#rule-actions daysAfterModificationGreaterThan - The condition for actions on a current version of a blob Tiering is not yet supported in a premium block blob storage account. For all other accounts, tiering is allowed only on block blobs and not for append and page blobs. tierToCool - Supported for blockBlob

   Source: Adapted from community discussion — zellck

   References

   • Microsoft Learn

   

   Next question

7. Question 217 · 570 in bank

   You plan to create an Azure Storage account named storage1 that will contain a file share named share1. You need to ensure that share1 can support SMB Multichannel. The solution must minimize costs. How should you configure storage?

   • APremium performance with locally-redundant storage (LRS)
   • BStandard performance with zone-redundant storage (ZRS)
   • CPremium performance with geo-redundant storage (GRS)
   • DStandard performance with locally-redundant storage (LRS)

   Show answer

   Answer: A

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

8. Question 218 · 570 in bank

   You have an Azure subscription that contains a storage account named storage1. You plan to use conditions when assigning role-based access control (RBAC) roles to storage1. Which storage1 services support conditions when assigning roles?

   • Acontainers only
   • Bfile shares only
   • Ctables only
   • Dqueues only
   • Econtainers and queues only
   • Ffiles shares and tables only

   Show answer

   Answer: E

   Explanation

   Anybody else just slogging through this dumps set? AZ 104 has got to be one of the most exhausting examinations to understand just because of the wide scope of things it covers as well as the specific questions on very specific products and scenarios. Good luck to everyone taking this exam.

   Source: Adapted from community discussion — DimsumDestroyer

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

9. Question 219 · 570 in bank

   HOTSPOT - You have an Azure subscription that contains the resource groups shown in the following table.

   

   The subscription contains the virtual networks shown in the following table.

   

   You plan to deploy the Azure Kubernetes Service (AKS) clusters shown in the following table.

   

   For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Agree with the answer NYY. explaination as follows 1. N subnet is not in the same location as cluster "If you want to select an existing virtual network, make sure it's in the same location and Azure subscription as your Kubernetes cluster." https://learn.microsoft.com/en-us/azure/aks/configure-azure-cni 2. Y azure cni network in same loacation as cluster and within the total pod no. limit 3. Y "Bring your own subnet and route table with kubenet .With kubenet, a route table must exist on your cluster subnet(s). AKS supports bringing your own existing subnet and route table." https://learn.microsoft.com/en-us/azure/aks/configure-kubenet#prerequisites

   Source: Adapted from community discussion — madao322

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

10. Question 220 · 570 in bank

    HOTSPOT - You have an Azure subscription that contains the resources shown in the following table.

    

    The status of VM1 is Running. You assign an Azure policy as shown in the exhibit. (Click the Exhibit tab.)

    

    You assign the policy by using the following parameters: Microsoft.ClassicNetwork/virtualNetworks Microsoft.Network/virtualNetworks Microsoft.Compute/virtualMachines For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

    

    This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

    Show the answer figure

    Answer: See figure below

    Explanation

    The answers have been reversed but this is 100% correct. No - You cannot move a resource into a RG if the resource is restricted in the destination RG No - The VM will not become deallocated, it will instead be marked as non-compliant Yes - You can change the VNet address space, even with the virtualnetwork restriction, instead you will be prevented from making ANOTHER VNet and the existing VNet will be marked as Non-Compliant. Source: Tested it in my Azure Lab

    Source: Adapted from community discussion — S3ktar

    

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-104 practice, question 211. 570 questions available.