AZ-800 practice questions 241–250

1. Question 241 · 264 in bank

   SIMULATION - You need to make the shares named Marketing and Sales from SRV1 available on the network by using the following UNC paths: • \\contoso.com\documents\marketing • \\contoso.com\documents\sales To complete this task, sign in to the required computer or computers.

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   create a DFS namespace named "documents" and within the documents namespace create 2 folders: marketing and sales; then Marketing has to be pointed at \\SRV1\marketing, Sales has to point at \\SRV1\sales; this way users will access "\\contoso.com\documents\marketing" and "\\contoso.com\documents\sales". This is a good way to expose all the fileshares located in different servers from 1 single location

   Source: Adapted from community discussion — sardonique

   References

   • Microsoft Learn

   

   Next question

2. Question 242 · 264 in bank

   Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains the servers shown in the following table.

   

   You need to create a Distributed File System (DFS) namespace that will contain the following: • A domain-based namespace named \\contoso.com\Public • A folder named Finance Which servers can you configure as folder targets for the Finance folder?

   • AServer3 only
   • BServer2 and Server3 only
   • CServer1 and Server3 only
   • DServer1, Server2, and Server3 only
   • EServer1, Server2, Server3, and Server4

   Show answer

   Answer: E

   Explanation

   Server1 and Server3 both have the DFS Namespaces role, allowing them to be configured as folder targets. Server2 only has the DFS Replication role and cannot be configured as a folder target. Server4 has no roles assigned, hence cannot be a folder target.

   Source: Adapted from community discussion — egdeeptha

   Next question

3. Question 243 · 264 in bank

   SIMULATION - You need to ensure that the Azure file share named share1 can sync to on-premises servers. The required source files are located in a folder named \\dc1.contoso.com\install. You do NOT need to specify the on-premises servers at this time. To complete this task, sign in the required computer or computers.

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Had this on my exam recently. Note: It says on-premises servers. You have 3 machines that you can connect so best to be sure to do those for all machines.

   Source: Adapted from community discussion — neilkraftmann

   

   Next question

4. Question 244 · 264 in bank

   SIMULATION - You need to register SRV1 to sync Azure file shares. The registration must use the 12345678 Storage Sync Service. The required source files are located in a folder named \\dc1.contoso.com\install. You do NOT need to configure file share synchronization at this time, and you do NOT need to update the agent.

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Had this on my exam recently. Login to SRV1 > enter File Explorer bar the location > Select File Sync Folder > Install the exe file > Open the program > Select the subscription, resource group, location etc. > Done! You can double check by opening the webbrowser and login to the Azure URL and go to the designated page to see.

   Source: Adapted from community discussion — neilkraftmann

   

   Next question

5. Question 245 · 264 in bank

   HOTSPOT - You have a server named Server1 that runs Windows Server 2022. You add two 4-TB hard drives named Disk1 and Disk2 to Server1. You need to format the drives. The solution must meet the following requirements: • Disk1 must support disk level quotas. • Disk2 must support Data Deduplication. Which type of file system should you use for each drive? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   To meet the requirements for each disk, you should use the following file systems: Disk1 (must support disk level quotas): NTFS only (NTFS supports disk quotas) Disk2 (must support Data Deduplication): NTFS or ReFS only (both NTFS and ReFS support Data Deduplication, but NTFS is more commonly used for this purpose)

   Source: Adapted from community discussion — formacaotismic

   References

   • Microsoft Learn

   

   Next question

6. Question 246 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You configure the DHCP scope options for Scope1. Does this meet the requirement?

   • AYes
   • BNo

   Show answer

   Answer: B

   Next question

7. Question 247 · 264 in bank

   You have a server that runs Windows Server and contains a shared folder named UserData. You need to limit the amount of storage space that each user can consume in UserData. What should you use?

   • AStorage Spaces
   • BWork Folders
   • CDistributed File System (DFS) Namespaces
   • DFile Server Resource Manager (FSRM)

   Show answer

   Answer: D

   Explanation

   Features File Server Resource Manager includes the following features: Quota management allows you to limit the space that is allowed for a volume or folder, and they can be automatically applied to new folders that are created on a volume. You can also define quota templates that can be applied to new volumes or folders.

   Source: Adapted from community discussion — AvoKikinha

   Next question

8. Question 248 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You create a DHCP reservation for each printer. Does this meet the requirement?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   A, DHCP reservation enables the allocation of fixed IP addresses to devices that require consistent connectivity, such as shared printers or conference room equipment. Security camera systems: Security cameras in an enterprise or surveillance system often require fixed IP addresses for efficient monitoring.

   Source: Adapted from community discussion — Ni_yot

   Next question

9. Question 249 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You create a DHCP address exclusion for each printer. Does this meet the requirement?

   • AYes
   • BNo

   Show answer

   Answer: B

   Next question

10. Question 250 · 264 in bank

    Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 contains a disk named Disk2. Disk2 contains a folder named UserData. UserData is shared to the Domain Users group. Disk2 is configured for deduplication. Server1 is protected by using Azure Backup. Server1 fails. You connect Disk2 to Server2. You need to ensure that you can access all the files on Disk2 as quickly as possible. What should you do?

    • ACreate a storage pool.
    • BRestore files from Azure Backup.
    • CInstall the File Server Resource Manager server role.
    • DInstall the Data Deduplication server role.

    Show answer

    Answer: D

    Explanation

    AS007 , you are wrong if you have data onprem in other server, why you will pay to Azure to get you data again? and that will take forever From: https://techcommunity.microsoft.com/t5/storage-at-microsoft/introduction-to-data-deduplication-in-windows-server-2012/ba-p/424257 3) Portability: A volume that is under deduplication control is an atomic unit. You can back up the volume and restore it to another server. You can rip it out of one Windows 2012 server and move it to another. Everything that is required to access your data is located on the drive. All of the deduplication settings are maintained on the volume and will be picked up by the deduplication filter when the volume is mounted. The only thing that is not retained on the volume are the schedule settings that are part of the task-scheduler engine. If you move the volume to a server that is not running the Data Deduplication feature, you will only be able to access the files that have not been deduplicated.

    Source: Adapted from community discussion — AvoKikinha

    References

    • Microsoft Learn
    • Microsoft Learn

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-800 practice, question 241. 264 questions available.