AZ-800 practice questions 221–230

1. Question 221 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. You need to identify which server is the PDC emulator for the domain. Solution: From Active Directory Users and Computers, you right-click contoso.com in the console tree, and then select Operations Master. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   This seems like Yes should be the correct answer, although technically you would also need to click on the PDC tab which is not mentioned, but that seems obvious.

   Source: Adapted from community discussion — ProfileX

   Next question

2. Question 222 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server 2022 and has the DHCP Server role. Server1 contains a single DHCP scope named Scope1. You deploy five printers to the network. You need to ensure that the printers are always assigned the same IP address. Solution: You deploy a DHCP relay agent to the network. Does this meet the requirement?

   • AYes
   • BNo

   Show answer

   Answer: B

   Next question

3. Question 223 · 264 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. Your network contains an Active Directory Domain Services (AD DS) forest. The forest contains three Active Directory sites named Site1, Site2, and Site3. Each site contains two domain controllers. The sites are connected by using DEFAULTIPSITELINK. You open a new branch office that contains only client computers. You need to ensure that the client computers in the new office are primarily authenticated by the domain controllers in Site1. Solution: You create a new subnet object that is associated to Site1. Does this meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Explanation

   https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc754697(v=ws.11)?redirectedfrom=MSDN By associating a site with one or more subnets, you assign a set of IP addresses to the site DNS uses the site name to locate a domain controller in that site (or in the next closest site to the client). DNS then provides the IP address of the domain controller to the client for the purpose of connecting to the domain controller. For this reason, it is important to ensure that the IP address that you assign to a domain controller maps to a subnet that is associated with the site of the respective server object Answer is Yes

   Source: Adapted from community discussion — syu31svc

   References

   • Microsoft Learn

   Next question

4. Question 224 · 264 in bank

   HOTSPOT - Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The network contains the servers shown in the following table.

   

   You plan to implement IP Address Management (IPAM). You need to use the Group Policy based provisioning method for managed servers. The solution must support server discovery. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Note IPAM must be installed on a domain member computer. You cannot install IPAM on a domain controller. If IPAM is installed on the same server with DHCP, then DHCP server discovery will be disabled. https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/jj878312(v=ws.11)

   Source: Adapted from community discussion — Jawad1462

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

5. Question 225 · 264 in bank

   HOTSPOT - Your company has a main office and 10 branch offices that are connected by using WAN links. The network contains an Active Directory domain. All users have laptops and regularly travel between offices. You plan to implement BranchCache in the branch offices. In each branch office, you install a server that runs Windows Server and the BranchCache feature. You register the servers in Active Directory. You need to configure the laptops to use the local BranchCache server automatically. The solution must minimize administrative effort. Which two Group Policy settings should you configure? To answer, select the settings in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   "Turn on BrancheCache" and "Enable Automatic Hosted Cache Discovery..." From the "Enable Automatic Hosted Cache Discovery..." GPO Help: If you enable this policy setting in addition to the "Turn on BranchCache" policy setting, BranchCache clients attempt to discover hosted cache servers in the local branch office.

   Source: Adapted from community discussion — chadamantium

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

6. Question 226 · 264 in bank

   HOTSPOT - You have an Azure subscription that contains the storage accounts shown in the following table.

   

   In the East US Azure region, you create a storage sync service named Sync1. You need to create a sync group in Sync1. Which storage accounts can you use, and what can you specify as the cloud endpoints. To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   The storage account must be in the same tenant, any subscription, and the same region as the Storage Sync Service. The storage account must be a general purpose v2 or premium file share storage account type. Answer is correct

   Source: Adapted from community discussion — syu31svc

   

   Next question

7. Question 227 · 264 in bank

   HOTSPOT - You have on-premises servers that run Windows Server as shown in the following table.

   

   You have an Azure file share named share1 that stores two files named File2.docx and File3.docx. You create an Azure File Sync sync group that includes the following endpoints: ✑ share1 ✑ D:\Folder1 on Server1 ✑ D:\Data1 on Server2 For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Reference: https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-introduction

   Source: Adapted from community discussion — Ciapek

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

8. Question 228 · 264 in bank

   You have a server named Server1 that runs Windows Server and contains two drives named C and D. Server1 hosts multiple file shares. You enable Data Deduplication on drive D and select the General purpose file server workload. You need to minimize the space consumed by files that were recently modified or deleted. What should you do?

   • ARun the Set-DedupVolume cmdlet and configure the Scrubbing job.
   • BRun the Set-DedupSchedule cmdlet and configure a GarbageCollection job.
   • CRun the Set-DedupVolume cmdlet and configure the InputOutputScale settings.
   • DRun the Set-DedupSchedule cmdlet and configure the Optimization job.

   Show answer

   Answer: B

   Explanation

   Garbage Collection The Garbage Collection job reclaims disk space by removing unnecessary chunks that are no longer being referenced by files that have been recently modified or deleted.

   Source: Adapted from community discussion — ahenriquez02

   References

   • Microsoft Learn

   Next question

9. Question 229 · 264 in bank

   HOTSPOT - You have a server named Server1 that runs Windows Server and contains three volumes named C, D, and E. Files are stored on Server1 as shown in the following table.

   

   For volume D, Data Deduplication is enabled and set to General purpose file server. You perform the following actions: • Move File1 to volume D. • Copy File2 to volume D and name the copy File4. • Move File3 to volume E. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   - File1 is deduplicated after the deduplication job runs: Yes (its size is greater than 32 KB and it is located on volume D with deduplication enabled). - File3 is deduplicated after the deduplication job runs: No (it was moved to volume E where deduplication is not enabled). - File4 is deduplicated after the deduplication job runs: No (its size is less than 32 KB and it will be skipped by deduplication).

   Source: Adapted from community discussion — smorar

   References

   • Microsoft Learn

   

   Next question

10. Question 230 · 264 in bank

    You have an Active Directory domain that contains a file server named Server1. Server1 runs Windows Server and includes the file shares shown in the following table.

    

    When users login to the network they receive the following network drive mappings. • H: maps to \\server1\users\%UserName% • G: maps to \\server1\%Department% You need to limit the amount of space consumed by user’s on Server1. The solution must meet the following requirements: • Prevent users using more than 5GB of space on their H: drive • Prevent Accounts department users from using more than 10GB of space on the G: drive • Prevent Marketing department users from using more than 15GB of space on the G: drive • Prevent Customer Service department users from using more than 2GB of space on the G: drive • Minimize administrative effort What should you use?

    • AFile Server Resource Manager (FSRM) quotas
    • BStorage tiering
    • CNTFS Disk quotas
    • DGroup Policy Preferences

    Show answer

    Answer: A

    Explanation

    To limit the amount of space consumed by users on Server1 with the specified requirements, you should use File Server Resource Manager (FSRM) quotas. FSRM allows you to set space limits on shared resources and provides more granular control over storage consumption. In this case, you can set FSRM quotas for the H: and G: drives based on the user's department and the specific space limits you need to enforce. So, the correct answer is: A. File Server Resource Manager (FSRM) quotas

    Source: Adapted from community discussion — NazerRazer

    References

    • Microsoft Learn

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-800 practice, question 221. 264 questions available.