301B practice questions 11–20

1. Question 11 · 197 in bank

   What is the correct command to reset an LTM device to its default settings?

   • Atmsh reset-all default
   • Btmsh set /sys config defaults
   • Ctmsh load /sys config default
   • Dtmsh /util bigpipe reset-factory-defaults

   Show answer

   Answer: C

   Next question

2. Question 12 · 197 in bank

   In which file would the LTM Specialist find virtual server configurations?

   • Abigip.conf
   • Bbigip_sys.conf
   • Cbigip_base.conf
   • Dprofile_base.conf

   Show answer

   Answer: A

   Next question

3. Question 13 · 197 in bank

   When re-licensing an LTM device from the command line interface, which tmsh command should the LTM Specialist use to generate the required information to provide on the F5 licensing portal?

   • Atmsh run /util get-dossier
   • Btmsh generate /sys dossier
   • Ctmsh list /sys registration-key
   • Dtmsh install /sys license registration-key

   Show answer

   Answer: A

   Next question

4. Question 14 · 197 in bank

   Select 2

   A device on the network is configured with the same IP address as the management address of the active LTM device, causing the management GUI to be inaccessible. Which two methods should the LTM Specialist use to access the LTM device in order to change the management IP address? (Choose two.)

   • AConnect via ssh to the AOM IP address.
   • BConnect via ssh to the management address.
   • CConnect to the LTM device via serial connection.
   • DConnect a monitor and keyboard to the LTM device.
   • EConnect via ssh to the standby unit and connect via ssh across the serial link between the devices.

   Show answer

   Answer: AC

   Next question

5. Question 15 · 197 in bank

   The LTM Specialist is in the process of creating a USB boot drive for the purpose of restoring the BIG-IP software to an LTM device. A separate LTM device has been selected for the purpose of creating the USB boot drive. The BIG-IP software ISO has already been uploaded and mounted on the separate LTM device. Which command should the LTM Specialist use to trigger the LTM device to install the BIG-IP software to the USB boot drive?

   • Atmsh
   • Binstall
   • Cmkdisk
   • Dbigip_software_create

   Show answer

   Answer: C

   Next question

6. Question 16 · 197 in bank

   An LTM Specialist has installed a hotfix that updated the SCCP firmware package. Which command will ensure that the host subsystem and SCCP reboot?

   • Areboot
   • Bfull_box_reboot
   • Cshutdown -r now
   • DThe reboot should be initiated via the HTTPS administration GUI.

   Show answer

   Answer: B

   Next question

7. Question 17 · 197 in bank

   Which procedure should an LTM Specialist follow to move a configuration from a 1500 to a 1600 hardware platform during an upgrade?

   • Atmsh save sys config file filename.scf copy the file from the /var/local/scf directory from one device to the other tmsh load sys config file filename.scf
   • Btmsh save sys backup file filename.scf copy the file from the /var/local/scf directory from one device to the other tmsh load sys backup file filename.scf
   • Ctmsh save sys backup file filename.scf copy the file from the /var/local/ucs directory from one device to the other tmsh load sys backup file filename.scf
   • Dtmsh save sys config file filename.scf copy the file from the /var/local/ucs directory from one device to the other

   Show answer

   Answer: A

   Next question

8. Question 18 · 197 in bank

   What is the recommended procedure for upgrading a major TMOS release on a BIG-IP platform?

   • A1. Renew the device license. 2.Take a configuration backup. 3.Reboot the device to the non-active volume. 4.Upload the device code. 5.Install device code to the current volume.
   • B1. Take a configuration backup. 2.Upload the device code. 3.Install device code to the non-active volume. 4.Reboot the device to the non-active volume. 5.Renew the device license.
   • C1. Renew the device license. 2.Take a configuration backup. 3.Upload the device code. 4.Install device code to the non-active volume. 5.Reboot the device to the non-active volume.
   • D1. Take a configuration backup. 2.Reboot the device to the non-active volume. 3.Renew the device license. 4.Upload the device code.

   Show answer

   Answer: C

   Next question

9. Question 19 · 197 in bank

   An LTM Specialist uploaded new releases .iso and .md5 files titled "BIGIP-FILENAME" via the GUI. Which commands are run via the command line from the root directory to verify the integrity of the new .iso file?

   • Acd /var/shared/images md5sum --check BIGIP-FILENAME.iso
   • Bcd /shared/images md5sum --check BIGIP-FILENAME.iso
   • Ccd /var/shared/images md5sum --check BIGIP-FILENAME.iso.md5
   • Dcd /shared/images

   Show answer

   Answer: D

   Next question

10. Question 20 · 197 in bank

    An LTM Specialist must perform a hot fix installation from the command line. What is the correct procedure to ensure that the installation is successful?

    • Aimport the hot fix to the /var/shared/images directory check the integrity of the file with an md5 checksum tmsh apply sys software hotfix volume <volume_name> <hotfix_name>.iso
    • Bimport the hot fix to the /var/shared/images directory check the integrity of the file with an md5 checksum tmsh install sys software hotfix <hotfix_name>.iso volume <volume_name>
    • Cimport the hot fix to the /shared/images directory check the integrity of the file with an md5 checksum tmsh apply sys software hotfix volume <volume_name> <hotfix_name>.iso
    • Dimport the hot fix to the /shared/images directory check the integrity of the file with an md5 checksum

    Show answer

    Answer: D

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

301B practice, question 11. 197 questions available.