N10-008AssociateCompTIAAll questions freePage 37 of 88

N10-008 practice questions 361–370

CompTIA Network+ (2021 series)871 questions across 88 pages are complete and free, with no account or card.

Start practising Review syllabus domains

Questions 361–370 · 871 available

Free practiceExam guide

Official study references

871 questions in this bank

Free access · progress saved on this device

Question 361 · 871 in bank
A PC user who is on a local network reports very slow speeds when accessing files on the network server. The user's PC is connecting, but file downloads are very slow when compared to other users' download speeds. The PC's NIC should be capable of Gigabit Ethernet. Which of the following will MOST likely fix the issue?
Show answer
Answer: B
Explanation
B. Replacing the patch cable is the most likely solution to fix the issue of slow download speeds when accessing files on the network server. A faulty or damaged patch cable can cause packet loss and reduce the overall speed of the network connection, even if the NIC is capable of Gigabit Ethernet. Releasing and renewing the PC's IP address, reseating the NIC inside the PC, and flushing the DNS cache are unlikely to resolve the issue of slow download speeds on the network.
Source: Adapted from community discussion — Alizadeh
Permanent link to question 361 Report an issue
Question 362 · 871 in bank
A network administrator is configuring logging on an edge switch. The requirements are to log each time a switch port goes up or down. Which of the following logging levels will provide this information?
Show answer
Answer: B
Explanation
B. Notifications The logging level "Notifications" will provide the information about when a switch port goes up or down. This level logs important but non-critical events that occur on the switch, including port status changes. Warnings, errors, and alerts are higher levels of logging that may not provide the specific information required in this scenario.
Source: Adapted from community discussion — StellarSteve
Permanent link to question 362 Report an issue
Question 363 · 871 in bank
An administrator is setting up a multicast server on a network, but the firewall seems to be dropping the traffic. After logging in to the device, the administrator sees the following entries:
Which of the following firewall rules is MOST likely causing the issue?
Show answer
Answer: B
Explanation
"An administrator is setting up a multicast server on a network" since it's asking about a multicast address that would be a class D IP address which falls between 224-239 so it's "B" since it falls into that range.
Source: Adapted from community discussion — DantheKing
Permanent link to question 363 Report an issue
Question 364 · 871 in bank
Which of the following would be the MOST likely attack used to bypass an access control vestibule?
Show answer
Answer: A
Explanation
A. Tailgating Tailgating would be the MOST likely attack used to bypass an access control vestibule. An access control vestibule is a physical security measure that requires individuals to go through a controlled space to access a secured area. Tailgating refers to the act of following closely behind someone who has been granted access to the controlled space, in an attempt to gain entry without proper authorization. Tailgating can be done intentionally or unintentionally, but in either case, it allows an unauthorized individual to gain access to the secured area.
Source: Adapted from community discussion — StellarSteve
Permanent link to question 364 Report an issue
Question 365 · 871 in bank
A company is considering shifting its business to the cloud. The management team is concerned about the availability of the third-party cloud service. Which of the following should the management team consult to determine the promised availability of the cloud provider?
Show answer
Answer: D
Explanation
As I write this comment, there are 3 out of 3 votes for A... What??? The correct answer is clearly D by the definition of SLA. Nothing else fits.
Source: Adapted from community discussion — [Removed]
Permanent link to question 365 Report an issue
Question 366 · 871 in bank
SIMULATION - You are tasked with verifying the following requirements are met in order to ensure network security. Requirements: ✑ Datacenter - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic ✑ Building A - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide devices to support 5 additional different office users - Add an additional mobile user - Replace the Telnet server with a more secure solution ✑ Screened subnet - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide a server to handle external 80/443 traffic - Provide a server to handle port 20/21 traffic INSTRUCTIONS - Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled. Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu. If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.
Show the answer figure
Answer:
Explanation
Top left subnet ג€" 206.208.134.0/28 Top right subnet ג€" 10.72.63.0/28 Bottom subnet ג€" 192.168.11.0/28 Screened Subnet devices ג€" Web server, FTP server Building A devices ג€" SSH server top left, workstations on all 5 on the right, laptop on bottom left DataCenter devices ג€" DNS server.
Source: Adapted from community discussion — BenBen1234
Permanent link to question 366 Report an issue
Question 367 · 871 in bank
A new company recently moved into an empty office space. Within days, users in the next office began noticing increased latency and packet drops with their Wi-Fi-connected devices. Which of the following is the MOST likely reason for this issue?
Show answer
Answer: A
Explanation
A. A new company moved in. So the resources from the other office is not being used and shouldn't have any congestion. Whether it be WiFi or wired, it shouldn't cause congestion in the network since it's a different company. It doesn't say they're sharing network.
Source: Adapted from community discussion — 1stAid
Permanent link to question 367 Report an issue
Question 368 · 871 in bank
A company is designing a SAN and would like to use STP as its medium for communication. Which of the following protocols would BEST suit the company's needs?
Show answer
Answer: C
Explanation
iSCSI is an acronym that stands for Internet Small Computer System Interface. It is a storage area networking (SAN) protocol used to send block storage from storage arrays or devices to client computers that aren’t directly connected to those devices. iSCSI provides block-level access to storage devices by carrying SCSI commands over a TCP/IP network. iSCSI facilitates data transfers over intranets and to manage storage over long distances.
Source: Adapted from community discussion — rah555
Permanent link to question 368 Report an issue
Question 369 · 871 in bank
A technician notices that equipment is being moved around and misplaced in the server room, even though the room has locked doors and cabinets. Which of the following would be the BEST solution to identify who is responsible?
Show answer
Answer: B
Explanation
The answer is B. Answers A and C do not identify who is the culprit, and answer D would be too costly and inefficient. If you hire a security guard, he can't be there at all times, so you have to hire one or more security guards (which is even more costly).
Source: Adapted from community discussion — [Removed]
Permanent link to question 369 Report an issue
Question 370 · 871 in bank
A computer engineer needs to ensure that only a specific workstation can connect to port 1 on a switch. Which of the following features should the engineer configure on the switch interface?
Show answer
Answer: B
Explanation
To ensure that only a specific workstation can connect to port 1 on a switch, the computer engineer should configure: B. Port security Port security is a feature that allows the restriction of access to a switch port based on the MAC address of the connected device. By configuring port security, the engineer can specify which MAC address is allowed to connect to the designated port, thereby controlling access to that port. Options A (Port tagging), C (Port mirroring), and D (Port aggregation) are different features used for various purposes: - A. Port tagging is related to VLANs (Virtual Local Area Networks). - C. Port mirroring is used for traffic analysis and monitoring by copying traffic from one port to another. - D. Port aggregation involves combining multiple physical ports into a single logical port for increased bandwidth and redundancy.
Source: Adapted from community discussion — salah112
Permanent link to question 370 Report an issue

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

About this question bank

Version 1.0.0. How we source questions

Question 366 · 871 in bank

SIMULATION - You are tasked with verifying the following requirements are met in order to ensure network security. Requirements: ✑ Datacenter - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide a dedicated server to resolve IP addresses and hostnames correctly and handle port 53 traffic ✑ Building A - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide devices to support 5 additional different office users - Add an additional mobile user - Replace the Telnet server with a more secure solution ✑ Screened subnet - Ensure network is subnetted to allow all devices to communicate properly while minimizing address space usage - Provide a server to handle external 80/443 traffic - Provide a server to handle port 20/21 traffic INSTRUCTIONS - Drag and drop objects onto the appropriate locations. Objects can be used multiple times and not all placeholders need to be filled. Available objects are located in both the Servers and Devices tabs of the Drag & Drop menu. If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.

This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

Show the answer figure

Answer:

Explanation

Top left subnet ג€" 206.208.134.0/28 Top right subnet ג€" 10.72.63.0/28 Bottom subnet ג€" 192.168.11.0/28 Screened Subnet devices ג€" Web server, FTP server Building A devices ג€" SSH server top left, workstations on all 5 on the right, laptop on bottom left DataCenter devices ג€" DNS server.

Source: Adapted from community discussion — BenBen1234