1Y0-403 practice questions 1–10

1. Question 1 · 99 in bank

   Scenario: Currently, the user interface for a Citrix Apps and Desktops environment is presented in English, but a planned on-premises expansion in Poland will support 100 new users with a requirement to use all Polish interfaces. Two constraints were identified by a Citrix Architect: ✑ Network bandwidth is low and unstable. ✑ Network latency is higher than 300 ms to the existing Site. How should the architect deploy Citrix Virtual Apps and Desktops for these users?

   • AInstall a StoreFront server in Poland.
   • BImplement Citrix Cloud Gateway in Europe.
   • CAdd a Satellite Zone to the existing Site.
   • DCreate a new Site in Poland.

   Show answer

   Answer: D

   Next question

2. Question 2 · 99 in bank

   Scenario: A planning document for deploying a new Citrix Virtual Apps and Desktops Site specifies that it will be created with 1 Site and different zones ini each of 3 regions. The IT team expects that each zone will host 825 concurrent user sessions, with no more than 28 concurrent session launches. What is the minimum acceptable Site-to-Site bandwidth required between the Primary Zone and a Satellite Zone?

   • A1 Kbps
   • B200 Mbps
   • C2 Mbps
   • D8 Gbps

   Show answer

   Answer: C

   Next question

3. Question 3 · 99 in bank

   Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment for a company that maintains branch offices in New York, Chicago, and Miami. Management has described the following requirements for the environment: ✑ The Citrix Virtual Apps and Desktops Site must be located in the company headquarters in Miami. ✑ All users will only need to access their default local print queue from within their HDX sessions. ✑ Users in Chicago need access to printers hosted on a Citrix Universal Print Server located in New York. ✑ Printing performance and bandwidth usage must be optimized where possible. ✑ The environment must be highly available. ✑ The auto-created client printer models must function with no additional configuration needed. Click the Exhibit button to review the printing requirements.

   

   What does the architect need to do to meet the printing requirements for the users in Chicago?

   • AEnable the Auto-create client printers policy with ‘Auto-create all client printers’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with no fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to the users in Chicago.
   • BEnable the Auto-create client printers policy with ‘Auto-create all client printers’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to Chicago users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to all users.
   • CEnable the Auto-create client printers policy with ‘Auto-create all client’s default printer only’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only if requested driver is unavailable’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to all users.
   • DEnable the Auto-create client printers policy with ‘Auto-create all client’s default printer only’ setting enabled. Enable the Universal print driver usage policy to ‘Use universal printing only’. Apply the policy to all users. Then, install and configure the Citrix Universal Print Server components and configure the Universal Print Server policy to ‘Enabled with fallback to Windows native remote printing’. Last, create a session printer policy, add the network printers that will use the Universal Print Server, and apply the policy to the users in Chicago.

   Show answer

   Answer: D

   Next question

4. Question 4 · 99 in bank

   Scenario: A Citrix Architect needs to assess a Citrix Virtual Apps and Desktops environment. The Citrix Virtual Apps and Desktops diagram in the exhibit gives details about the current Site and zone design. Click the Exhibit button to view the diagram.

   

   Which statement is correct if all Delivery Controllers in the Primary Zone fail?

   • ASatellite Zone 2 will be promoted and the Primary Zone Virtual Delivery Agent (VDA) machines will register within Satellite Zone 2.
   • BVirtual Delivery Agent (VDA) machines in the Primary Zone will NOT register within Satellite Zone 1 or Satellite Zone 2.
   • CVirtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 2.
   • DVirtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 1.

   Show answer

   Answer: B

   Next question

5. Question 5 · 99 in bank

   Select 2

   Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. While assessing the existing infrastructure, the architect determined that a number of users utilize legacy USB print devices that they will continue to need locally and within HDX sessions. The current HDX-optimized print virtual channel will NOT support these devices, so the architect decides that the Generic USB redirection channel should be used. Which two factors must the architect consider when using Generic USB redirection? (Choose two.)

   • AIt requires more network bandwidth compared to standard HDX virtual channels.
   • BLocal access to printers will be lost until the HDX sessions is disconnected or ended.
   • CManufacturer printer drivers will need to be installed on user workstations.
   • DThe Citrix Virtual Channel Software Development Kit (VCSDK) will be required.
   • EIt is supported for only USB 3.0 devices and features.

   Show answer

   Answer: AB

   Next question

6. Question 6 · 99 in bank

   Scenario: A Citrix Architect designed an active-passive Citrix Virtual Apps and Desktops environment, where the passive data center serves as the disaster recovery (DR) data center for all users. Twelve items have been configured: ✑ Citrix ADC Global Server Load Balancing (GSLB) to provide single URL direction to the active data center. ✑ GSLB has health monitors configured for the load balanced servers. ✑ Citrix Gateways are on both data centers. ✑ Citrix ADC load balancing occurs for StoreFront and Delivery Controller XML services. ✑ A single Citrix Virtual Apps and Desktops Site exists. ✑ Four Delivery Controllers are members of the Site. ✑ Two Delivery Controllers are members of the Primary Zone in the active data center. ✑ Two Delivery Controllers are members of the Satellite Zone in the passive data center. ✑ SQL is deployed in the active data center. ✑ Local Host Cache is enabled. ✑ Two StoreFront servers are deployed in each data center aggregating resources from the Delivery Controllers in the respective data center. ✑ Virtual Delivery Agent (VDA) machines are deployed in both data centers and configured to register with Delivery Controllers in their zone. What would happen if the Delivery Controllers in the primary data center were turned off?

   • AVDA machines from the primary data center would register with the Delivery Controllers in the passive data center.
   • BStoreFront in the primary data center would still be able to launch sessions.
   • CGSLB will start redirecting connections to the secondary data center.
   • DGSLB will NOT identify that the Delivery Controllers are down and sessions CANNOT launch.

   Show answer

   Answer: C

   Next question

7. Question 7 · 99 in bank

   Scenario: A Citrix Architect completed an assessment of an existing environment. The architect learned that one of the business requirements dictate that automatic update functionality is disabled, and that deployment is exclusively done by electronic software distribution (ESD). Which parameter is required to configure the Citrix Workspace Updates settings from the command line interface, when installing Citrix Workspace app for Windows?

   • A/AutoUpdateStream=current
   • B/AutoUpdateCheck=auto
   • C/AutoUpdateStream=disabled
   • D/AutoUpdateCheck=disabled

   Show answer

   Answer: D

   Next question

8. Question 8 · 99 in bank

   Scenario: A Citrix Architect has developed the hardware requirements for a small production Citrix Virtual Apps and Desktops environment as follows: - Access to the environment hosted in a single data center - Ability to perform maintenance on the environment without requiring an outage - Keep management efforts to a minimum Which hardware requirement does the architect need to include for Citrix Hypervisor hosts to meet the customer's needs?

   • AN+1 Citrix Hypervisor hosts in a single cluster/pool
   • BSeparate Citrix Hypervisor cluster/pool in an alternate data center
   • CMultiple individual Citrix Hypervisor hosts in the same data center
   • DSeparate Citrix Hypervisor clusters/pools in the same data center

   Show answer

   Answer: A

   Next question

9. Question 9 · 99 in bank

   Select 2

   Scenario: A Citrix Architect is implementing a new Citrix Virtual Apps and Desktops environment. The IT team has purchased 1,000 Citrix Virtual Apps and Desktops Advanced licenses. Moving forward, the company requires the IT team to produce a report of all unsuccessful connections of Citrix Virtual Apps during the previous 12 months. Which two actions does the architect need to take to support these requirements? (Choose two.)

   • AConfigure 'GroomSessionsRetentionDays' to 365 days.
   • BUpgrade to Citrix Virtual Desktops Premium licenses.
   • CConfigure 'GroomFailuresRetentionDays' to 365 days.
   • DUpgrade to Citrix Gateway Universal licenses.
   • EImplement Citrix Application Delivery Management.

   Show answer

   Answer: BC

   Next question

10. Question 10 · 99 in bank

    Scenario: A Citrix Architect is designing a Citrix Virtual Desktops environment. The Engineer Group requires NVIDIA hardware with shared virtualized GPUs due to its use of graphical applications. Management wants to use 4 components within the Citrix Virtual Desktops environment to meet these requirements: ✑ NVIDIA GRID Tesla P40 GPUs ✑ Microsoft Hyper-V Server 2012 R2 ✑ Windows 10 virtual machines (VMs) ✑ Citrix Virtual Desktops 7 Which component must the architect change to implement this use case?

    • AWindows 10 virtual machines
    • BCitrix Virtual Desktops 7
    • CNVIDIA GRID Tesla P40 GPUs
    • DMicrosoft Hyper-V Server 2012 R2

    Show answer

    Answer: D

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

1Y0-403 practice, question 1. 99 questions available.