300-425 practice questions 241–245

1. Question 241 · 245 in bank

   Select 2

   A consulting engineer for an oil refinery is trying to extend network connectivity across various buildings via a mesh network. The mesh network has these requirements: • The MAPs must be scalable and secure to operate in hazardous environments. • The MAPs must extend the wired network infrastructure from RAP. • The wired infrastructure must pass the native and the tagged VLANs from the remote side without defining them on the RAP or MAP Gigabit interfaces. • MAPS must extend universal access to the remote building to allow clients to connect on the 2.4 GHz and 5 GHz bands in local mode. • Cisco IW6300 APs must be used. Which two mesh APs features must be used to meet the design requirements? (Choose two.)

   • Abridge link
   • Bbridge data rates
   • Cbackhaul interface
   • Ddaisy chaining
   • EEthernet bridging

   Show answer

   Answer: AE

   Next question

2. Question 242 · 245 in bank

   A network administrator for a large enterprise with multiple office buildings uses Cisco 9800 WLCs to manage the wireless network. Recently, they noticed that clients experience delays when roaming between access points, especially during peak hours. The administrator decides to optimize client roaming on the Cisco 9800 WLC to enhance user experience. Which configuration must the administrator apply on the Cisco 9800 WLC to optimize client roaming?

   • A//IMG//
   • B//IMG//
   • C//IMG//
   • D//IMG//

   Show answer

   Answer: C

   Next question

3. Question 243 · 245 in bank

   A customer designs a Cisco wireless environment to provide connectivity to employees and guests. The guest SSID must be configured on three anchor WLCs named Anchor1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?

   • A0
   • B1
   • C2
   • D3

   Show answer

   Answer: A

   Next question

4. Question 244 · 245 in bank

   A university has three campus locations and the main data center. Each campus location has a Cisco Catalyst 9800-40 WLC that manages 600 APs. The data center has a Catalyst 9800-40 WLC, which serves as an N+1 backup for each campus WLC. A consulting engineer must install four additional Catalyst 9800-40 WLCs to serve as the high availability SSO pair for each campus, but only two have been approved due to budget restrictions. The new WLCs must be implemented using these requirements: • Data center WLC must always be available as N+1 backup to either campus WLC. • Campus1 WLC must operate with zero downtime. • In the event of multiple campus outages, the AP priority order is to support Campus3, Campus2, and then Campus1. • No APs on campus can be left stranded without a WLC in the event of an outage. What design approach must the consulting engineer take?

   • AThe data center WLC and Campus1 WLC are the high availability SSO pair. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.
   • BThe data center WLC and Campus3 WLC are the high availability SSO pair. Campus1 APs have priority 4, Campus2 APs have priority 2, and Campus3 APs have priority 1.
   • CThe Campus1 WLC is the high availability SSO pair. The data center WLC is split into two WLCs, Data Center1 and Data Center2. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.
   • DThe Campus3 WLC is the high availability SSO pair. The data center WLC is split into two WLCs, Data Center1 and Data Center2. Campus3 APs have priority 1, Campus2 APs have priority 2, and Campus1 APs have priority 4.

   Show answer

   Answer: A

   Next question

5. Question 245 · 245 in bank

   A university has three campus locations and the main data center. Each campus location has a Cisco Catalyst 9800-40 WLC that manages 600 APs. The data center has a Catalyst 9800-40 WLC, which serves as an N+1 backup for each campus WLC. A consulting engineer must install four additional Catalysts 9800-40 WLCs to serve as the high availability SSO pair for each campus, but only two have been approved due to budget restrictions. The new WLCs must be implemented using these requirements: • Data center WLC must always be available as N+1 backup to either campus WLC. • Campus1 WLC must operate with zero downtime. • In the event of multiple campus outages, the AP priority order is to support Campus3, Campus2, and then Campus1. • Each campus acts as either secondary or tertiary backup to another campus, with data center WLC always being the primary. What design approach must the consulting engineer take?

   • AThe data center WLC and Campus3 WLC are the high availability SSO pair. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.
   • BThe data center WLC and Campus1 WLC are the high availability SSO pair. Campus 1 APs have priority 4, Campus2 APs have priority 2, and Campus3 APs have priority 1.
   • CThe data center WLC and Campus3 WLC are the high availability SSO pair. Campus1 APs have priority 4, Campus2 APs have priority 2, and Campus3 APs have priority 1.
   • DThe data center WLC and Campus1 WLC are the high availability SSO pair. Campus3 APs have priority 4, Campus2 APs have priority 2, and Campus1 APs have priority 1.

   Show answer

   Answer: D

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

300-425 practice, question 241. 245 questions available.