2V0-33.22 practice questions 51–60

1. Question 51 · 84 in bank

   Select 2

   Which two steps must an administrator take in order to deploy an instance of Azure VMware Solutions? (Choose two.)

   • ACreate a support request with Microsoft Azure Support to create a host quota.
   • BDeploy and configure Microsoft Enterprise Edge (MSEE) appliances.
   • CCreate a support request with VMware Support to create a private cloud.
   • DAssociate the subscription with a Microsoft Enterprise Agreement.
   • EDeploy and Configure Microsoft Azure ExpressRoute.

   Show answer

   Answer: AD

   Explanation

   https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment#identify-the-subscription --> Identify the Azure subscription, resource group, region, and resource name (The subscription must be associated with a Microsoft Enterprise Agreement (EA), a Cloud Solution Provider (CSP) Azure plan, or a Microsoft Customer Agreement (MCA) and then: Identify the size hosts and determine the number of clusters and hosts --> Request a host quota for an eligible Azure plan Identify the /22 CIDR IP segment for private cloud management Identify a single network segment Define the virtual network gateway Define VMware HCX network segments

   Source: Adapted from community discussion — aee63f0

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

2. Question 52 · 84 in bank

   When configuring Hybrid Linked Mode, what is the maximum supported latency between an on-premises environment and a VMware Cloud on AWS software-defined data center (SDDC)?

   • A200 milliseconds round trip
   • B250 milliseconds round trip
   • C150 milliseconds round trip
   • D100 milliseconds round trip

   Show answer

   Answer: D

   Explanation

   D is the correct answer. The maximum latency between your cloud SDDC and on-premises data center cannot exceed 100 msec roundtrip https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-BE75F0F1-2864-4926-97FE-37E635471C43.html#:~:text=The%20maximum%20latency%20between%20your,will%20have%20Cloud%20Administrator%20permissions.

   Source: Adapted from community discussion — KrazyKarl

   References

   • docs.vmware.com documentation

   Next question

3. Question 53 · 84 in bank

   Select 2

   A cloud administrator is asked to configure access to the VMware Cloud Services Console based on the following requirement: Groups and users should be synchronized from the internal Active Directory Which two options should the administrator configure to meet this requirement? (Choose two.)

   • AWorkspace ONE Access connector
   • BEnterprise federation with dynamic (connectorless) authentication setup
   • CSAML 2.0 Identity Provider
   • DEnterprise federation with connector-based authentication setup
   • EWorkspace ONE Assist

   Show answer

   Answer: AC

   Explanation

   A. Workspace ONE Access connector D. Enterprise federation with connector-based authentication setup Explanation: To synchronize groups and users from the internal Active Directory to the VMware Cloud Services Console, the administrator should: A. Deploy a Workspace ONE Access connector. This connector integrates with the on-premises Active Directory to synchronize users and/or groups to Workspace ONE Access. D. Set up Enterprise federation with connector-based authentication. This setup uses the Workspace ONE Access connector to authenticate and sync users/groups from the on-premises Active Directory. The other options listed are not specifically required for this synchronization and authentication requirement.

   Source: Adapted from community discussion — Manu62

   References

   • docs.vmware.com documentation

   Next question

4. Question 54 · 84 in bank

   A cloud administrator is tasked with creating a new network segment in the software-defined data center that utilizes the corporate DHCP server to provide IP addresses. What is the proper sequence to create the required network segments?

   • A1. Create a new segment attached to the Tier-0 gateway 2. Configure the segment DHCP ip-helper
   • B1. Create a DHCP server profile 2. Create a new segment attached to the Tier-0 gateway 3. Configure the segment DHCP config to utilize the new DHCP server profile
   • C1. Create a new segment attached to the Tier-1 gateway 2. Configure the segment DHCP ip-helper
   • D1. Create a DHCP relay profile 2. Create a new segment attached to the Tier-1 gateway 3. Configure the segment DHCP config to utilize the new DHCP relay profile

   Show answer

   Answer: D

   Next question

5. Question 55 · 84 in bank

   When configuring VMware Cloud Disaster Recovery (VCDR), with what can protection groups and disaster recovery plans be associated?

   • AOnly a single vCenter instance in the on-premises data center or VMware Cloud software-defined data center (SDDC).
   • BMultiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or on-premises data center.
   • CMultiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or only a single vCenter in the on-premises data center.
   • DOnly a single vCenter instance in the VMware Cloud software-defined data center (SDDC) or multiple vCenter instances in the on-premises data center.

   Show answer

   Answer: A

   References

   • docs.vmware.com documentation

   Next question

6. Question 56 · 84 in bank

   Select 2

   What are two incident management services included in the VMware Cloud on AWS service management process? (Choose two.)

   • AEmail notifications for pending upgrades
   • BReturn to service
   • CSeverity classification
   • DSDDC upgrades
   • EWorkload incident management

   Show answer

   Answer: BC

   Explanation

   B. Return to service C. Severity classification Explanation: Incident management in VMware Cloud on AWS involves handling any unplanned interruptions to an IT service or reductions in the quality of an IT service. Key aspects of this process include: B. Return to service: Ensuring that the services are restored as quickly as possible following an incident. C. Severity classification: Classifying incidents based on their impact and urgency, helping prioritize the response. Options like "Email notifications for pending upgrades" and "SDDC upgrades" pertain more to change management and service upgrades than to incident management. "Workload incident management" is a broader term that doesn't specifically refer to a VMware Cloud on AWS service management process.

   Source: Adapted from community discussion — Manu62

   Next question

7. Question 57 · 84 in bank

   Which types of networks are available when creating a segment in VMware Cloud on AWS?

   • ARouted, Extended, Disconnected
   • BAdvertised, Extended, Isolated
   • CRouted, Stretched, Disconnected
   • DAdvertised, Stretched, Isolated

   Show answer

   Answer: A

   References

   • docs.vmware.com documentation
   • docs.vmware.com documentation

   Next question

8. Question 58 · 84 in bank

   A customer is running a software-defined data center (SDDC) in the US-East-2 region and wants to connect the workload network segment to their on-premises data center and multiple company Amazon Virtual Private Clouds (VPCs) running in US-East-2. Which connectivity option can they use to accomplish this?

   • AAWS Direct Connect
   • BTwo VPN connections
   • CVMware Transit Connect
   • DOne VPN connection

   Show answer

   Answer: C

   Next question

9. Question 59 · 84 in bank

   Select 2

   In VMware Cloud Disaster Recovery (VCDR), a protection group consists of which two components? (Choose two.)

   • AMembers
   • BPolicies for snapshots
   • CVirtual Machine File System (VMFS) datastores
   • DVM customizations
   • EClusters

   Show answer

   Answer: AB

   Next question

10. Question 60 · 84 in bank

    A cloud administrator establishes a VPN connection to the VMware Cloud data center but is unable to access the VMware Cloud vCenter. Which step can the administrator take to resolve this?

    • AModify the default vCenter management network to participate in the on-premises IP space.
    • BCreate a segment in the VMware Cloud data center for connection to the vCenter.
    • CEstablish a layer 2 connection between the on-premises data center and the VMware Cloud data center.
    • DCreate an NSX firewall rule in the VMware Cloud data center allowing access to the vCenter from the on-premises data center.

    Show answer

    Answer: D

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

2V0-33.22 practice, question 51. 84 questions available.