MB-335 practice questions 21–30

1. Question 21 · 132 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service. You need to create a subcontracting activity for the painting service. Solution: Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01. Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell. Create a production flow process activity using the painting work cell and the service item as the picking activity. Create a service term on the activity to tie the purchase agreement to the activity. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Next question

2. Question 22 · 132 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing. The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient. You need to ensure that the system is set up to support the manufacturing process. Solution: Create a dimension-based product master with variants and use the trade agreements to specify the different pricing. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: A

   Next question

3. Question 23 · 132 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A manufacturing company has a new speaker that is available with standard and premium carbon fiber options. For the premium option, speakers are made to order. Customers can choose from seven product attributes at different prices. You need to create and configure the product and pricing for the new speaker. Solution: Create a constraint-based product with configurations. Use a price model to calculate the different configurable option costs. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Next question

4. Question 24 · 132 in bank

   Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing. The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient. You need to ensure that the system is set up to support the manufacturing process. Solution: Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Next question

5. Question 25 · 132 in bank

   Select 2

   A manufacturer uses Dynamics 365 Supply Chain Management to build bicycles. When manufacturing releases production orders to the warehouse, the warehouse must avoid automatically releasing the bill of materials (BOM) and formula lines. The BOM and formula lines must be manually released later through a batch process. You need to configure the functionality for the records. At which two locations should you configure this functionality? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

   • Asite
   • Bwarehouse
   • Cproduction order
   • Dlegal entity
   • Eitem model group

   Show answer

   Answer: CE

   Next question

6. Question 26 · 132 in bank

   You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item. This item has the following Lean setup: The setup uses a Lean schedule group with a throughput ratio = 2. The process activity tied to production flow has the following runtime activity times: time = 3 min, per quantity = 1. The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8 hour day). The throughput is 10 per hour. You need to set up a Discrete operation to mirror the item’s production flow activity. What should you do?

   • ACreate a route with a runtime = 6, a process quantity = 1, and the operation’s hours/time = 1.
   • BCreate a route with a runtime = 6, a process quantity = 1, and the operation’s hours/time = 0.0167 (e.g. 1 hour/60 minutes).
   • CCreate a route with a runtime = 1, a process quantity = 6, and the operation’s hours/time = 0.0167 (e.g. 1 hour/60 minutes).
   • DCreate a route with a runtime = 1, a process quantity = 1, and the operation’s hours/time = 0.0167 (e.g. 1 hour/60 minutes).

   Show answer

   Answer: B

   Next question

7. Question 27 · 132 in bank

   Select 3

   A company that makes artisan chocolate is implementing Dynamics 365 Supply Chain Management. To safeguard the quality of its ingredients, the company limits recipe substitutions of its chocolates. Its top-selling chocolate bar must contain 20 percent sugar. The sugar can be obtained from either cane or beet sugar depending on supply at the time of production. The system must be able to automatically substitute the appropriate sugar items when generating production orders to meet the quality level of sugar even when the preferred concentration of cane sugar is out of stock. You need to configure the system. Which three components must you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

   • AFormula lines
   • BPriority
   • CItem allocation key
   • DPlan group
   • EItem model group
   • FBOM lines

   Show answer

   Answer: ABD

   Next question

8. Question 28 · 132 in bank

   A customer produces light projection toys for holiday decorations throughout the year. The production process creates the projection toy at the following work cells: stands, main assembly, electric, visuals, and packaging. Vendors must create templates for each toy they produce each season. They must manage the transfer of templates to the warehouse. Each transfer for each vendor must use the same purchase agreement. You need to configure the subcontracted transfer activity. What should you do?

   • ASet the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the vendor.
   • BSet the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.
   • CSet the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse.
   • DSet the transfer activity Freighted by value to Recipient. Ensure that purchase agreements inside the vendor ID of the vendor.
   • ESet the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the warehouse.
   • FSet the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.

   Show answer

   Answer: C

   Next question

9. Question 29 · 132 in bank

   Select 2

   A manufacturer is implementing master planning in Dynamics 365 Supply Chain Management for planned orders. Master planning is running for the first time in the production environment. You need to instruct the production planners where to view the following information: Planned orders that are created in a run. An item’s planned orders against the demand over user-defined periods of time. In which two possible locations can the information be found? Each correct answer presents a complete solution, NOTE: Each correct selection is worth one point.

   • ASequenced planned orders
   • BNet requirements form
   • CSupply Schedule form
   • DItem requirement statistics
   • EPlanned orders

   Show answer

   Answer: BE

   Next question

10. Question 30 · 132 in bank

    You are the production scheduler at a manufacturing company. The company is not using advanced warehousing. You have firmed a planned production order from master planning. The order is ready to be processed. You now need to process the order in production control. What should you do first?

    • AStart the order.
    • BEstimate the order.
    • CSchedule the order.
    • DReport the order as finished.

    Show answer

    Answer: A

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

MB-335 practice, question 21. 132 questions available.