AZ-400 practice questions 31–40

1. Question 31 · 540 in bank

   Note: The question is included in a number of questions that depicts the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements. You run the Register-AzureRmAutomationDscNode command in your company's environment. You need to make sure that your company's test servers remain correctly configured, regardless of configuration drift. Solution: You set the -ConfigurationMode parameter to ApplyAndMonitor. Does the solution meet the goal?

   • AYes
   • BNo

   Show answer

   Answer: B

   Explanation

   https://docs.microsoft.com/en-us/powershell/module/azurerm.automation/register-azurermautomationdscnode?view=azurermps-6.13.0 Specifies the DSC configuration mode. Valid values are: ApplyAndMonitor ApplyAndAutocorrect ApplyOnly Answer is No; use ApplyAndAutocorrect for "correctly configured, regardless of configuration drift"

   Source: Adapted from community discussion — syu31svc

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

2. Question 32 · 540 in bank

   DRAG DROP - You are configuring the Azure DevOps dashboard. The solution must meet the technical requirements. Which widget should you use for each metric? To answer, drag the appropriate widgets to the correct metrics. Each widget may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Woodgrove Bank identifies the following technical requirements: The Azure DevOps dashboard must display the metrics shown in the following table: Box 1: Velocity - Velocity displays your team velocity. It shows what your team delivered as compared to plan. Box 2: Release pipeline overview Release pipeline overview shows the status of environments in a release definition. Box 3: Query tile - Query tile displays the total number of results from a query. Reference: https://docs.microsoft.com/en-us/azure/devops/report/dashboards/widget-catalog?view=azure-devops

   Source: Adapted from community discussion — lglars

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

3. Question 33 · 540 in bank

   You plan to deploy a new database environment. The solution must meet the technical requirements. You need to prepare the database for the deployment. How should you format the export?

   • ANDF
   • BBACPAC
   • CDACPAC
   • DMDF

   Show answer

   Answer: B

   Explanation

   DACPAC is primarily focused on database schema deployment and management, while BACPAC includes both the schema and data of a database, making it suitable for data migration and backups. DACPACs are used for controlled schema deployments, while BACPACs are used for transferring entire databases across environments.

   Source: Adapted from community discussion — ShomaV

   References

   • Microsoft Learn
   • Microsoft Learn

   Next question

4. Question 34 · 540 in bank

   You need to meet the technical requirements for monitoring App1. What should you use?

   • ASplunk
   • BAzure Application Insights
   • CAzure Advisor
   • DApp Service logs

   Show answer

   Answer: B

   Next question

5. Question 35 · 540 in bank

   HOTSPOT - How should you complete the code to initialize App Center in the mobile application? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Scenario: Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use. In order to use App Center, you need to opt in to the service(s) that you want to use, meaning by default no services are started and you will have to explicitly call each of them when starting the SDK. Insert the following line to start the SDK in your app's AppDelegate class in the didFinishLaunchingWithOptions method. MSAppCenter.start("{Your App Secret}", withServices: [MSAnalytics.self, MSCrashes.self]) Reference: https://docs.microsoft.com/en-us/appcenter/sdk/getting-started/ios

   Source: Adapted from community discussion — Sylph

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

6. Question 36 · 540 in bank

   You add the virtual machines as managed nodes in Azure Automation State Configuration. You need to configure the managed computers in Pool7. What should you do next?

   • AModify the RefreshMode property of the Local Configuration Manager (LCM).
   • BRun the Register-AzureRmAutomationDscNode Azure Powershell cmdlet.
   • CModify the ConfigurationMode property of the Local Configuration Manager (LCM).
   • DInstall PowerShell Core.

   Show answer

   Answer: C

   Explanation

   The Register-AzureRmAutomationDscNode cmdlet registers an Azure virtual machine as an APS Desired State Configuration (DSC) node in an Azure Automation account. See: https://docs.microsoft.com/en-us/powershell/module/azurerm.automation/register-azurermautomationdscnode?view=azurermps-6.13.0

   Source: Adapted from community discussion — motu

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   Next question

7. Question 37 · 540 in bank

   DRAG DROP - You need to implement the code flow strategy for Project2 in Azure DevOps. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Step 1: Create a repository - A Git repository, or repo, is a folder that you've told Git to help you track file changes in. You can have any number of repos on your computer, each stored in their own folder. Step 2: Create a fork - Step 3: Add a build policy for the fork Build policies help teams protect their important branches of development. Policies enforce your team's code quality and change management standards. Scenario: Implement a code flow strategy for Project2 that will: ✑ Enable Team2 to submit pull requests for Project2. ✑ Enable Team2 to work independently on changes to a copy of Project2. ✑ Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2. Reference: https://docs.microsoft.com/en-us/azure/devops/repos/git/manage-your-branches

   Source: Adapted from community discussion — saschgo

   References

   • Microsoft Learn
   • Microsoft Learn
   • Microsoft Learn

   

   Next question

8. Question 38 · 540 in bank

   DRAG DROP - You need to configure Azure Automation for the computers in Pool7. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Step 1: Create a Desired State Configuration (DSC) configuration file that has an extension of .ps1. Step 2: Run the Import-AzureRmAutomationDscConfiguration Azure Powershell cmdlet The Import-AzureRmAutomationDscConfiguration cmdlet imports an APS Desired State Configuration (DSC) configuration into Azure Automation. Specify the path of an APS script that contains a single DSC configuration. Example: PS C:\>Import-AzureRmAutomationDscConfiguration -AutomationAccountName "Contoso17"-ResourceGroupName "ResourceGroup01" -SourcePath "C:\DSC \client.ps1" -Force This command imports the DSC configuration in the file named client.ps1 into the Automation account named Contoso17. The command specifies the Force parameter. If there is an existing DSC configuration, this command replaces it. Step 3: Run the Start-AzureRmAutomationDscCompilationJob Azure Powershell cmdlet The Start-AzureRmAutomationDscCompilationJob cmdlet compiles an APS Desired State Configuration (DSC) configuration in Azure Automation. Reference: https://docs.microsoft.com/en-us/powershell/module/azurerm.automation/import-azurermautomationdscconfiguration https://docs.microsoft.com/en-us/powershell/module/azurerm.automation/start-azurermautomationdsccompilationjob

   Source: Adapted from community discussion — zellck

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

9. Question 39 · 540 in bank

   HOTSPOT - How should you configure the release retention policy for the investment planning depletions suite? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

   

   This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

   Show the answer figure

   Answer: See figure below

   Explanation

   Box 1: Shared Access Authorization token Every request made against a storage service must be authorized, unless the request is for a blob or container resource that has been made available for public or signed access. One option for authorizing a request is by using Shared Key. Box 2: Azure Storage with HTTPS access Scenario: The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS. The investment planning application suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers. Reference: https://docs.microsoft.com/en-us/rest/api/storageservices/authorize-with-shared-key

   Source: Adapted from community discussion — ChauPhan

   References

   • Microsoft Learn
   • Microsoft Learn

   

   Next question

10. Question 40 · 540 in bank

    HOTSPOT - You need to configure a cloud service to store the secrets required by the mobile applications to call the share pricing service. What should you include in the solution? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

    

    This is an interactive task on the real exam — a drag-and-drop, hotspot or ordering question. There is nothing to select here, so the answer is shown below for reference.

    Show the answer figure

    Answer: See figure below

    Explanation

    Every request made against a storage service must be authorized, unless the request is for a blob or container resource that has been made available for public or signed access. One option for authorizing a request is by using Shared Key. Scenario: The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS. The investment planning applications suite will include one multi-tier web application and two iOS mobile applications. One mobile application will be used by employees; the other will be used by customers. Reference: https://docs.microsoft.com/en-us/rest/api/storageservices/authorize-with-shared-key

    Source: Adapted from community discussion — Yogothegreat

    References

    • Microsoft Learn
    • Microsoft Learn

    

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

AZ-400 practice, question 31. 540 questions available.