1Y0-231 practice questions 51–60

1. Question 51 · 133 in bank

   Scenario: A Citrix Administrator deployed a Citrix ADC in one-arm mode. Currently, the VLANs 20, 30, and 40 are tagged on the interface with the option of ‘tagall’. What is true regarding the VLANs, when ‘tagall’ is enabled on the interface?

   • AVLANS 1, 20, 30, 40, and HA packets are tagged on the interface.
   • BVLANS 20, 30, and 40 are tagged on the interface.
   • CVLANS 1, 20, 30, and 40 are tagged on the interface.
   • DVLANS 20, 30, 40, and HA packets are tagged on the interface.

   Show answer

   Answer: C

   Next question

2. Question 52 · 133 in bank

   A Citrix ADC is connected with one network interface to the client network and another to the server network, ensuring that all traffic flows through the appliance. Which type of deployment is this?

   • ADirect server return
   • BOne-arm
   • CBridge mode
   • DTwo-arm

   Show answer

   Answer: D

   Next question

3. Question 53 · 133 in bank

   A Citrix Administrator needs to deploy a Citrix ADC between the servers and the client, with servers only allowed to reach the client through the Citrix ADC. In which mode should the administrator deploy the Citrix ADC?

   • AInline
   • BDirect server return
   • CTransparent
   • DOne-arm

   Show answer

   Answer: A

   Next question

4. Question 54 · 133 in bank

   Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?

   • APING
   • BUDP
   • CLDAP
   • DTCP

   Show answer

   Answer: D

   Next question

5. Question 55 · 133 in bank

   Which Citrix ADC platform offers an out-of-the-box, hardware-independent, multi-tenant solution?

   • ASDX
   • BCPX
   • CMPX
   • DVPX

   Show answer

   Answer: A

   Next question

6. Question 56 · 133 in bank

   Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure. What could be the cause of this issue?

   • AHA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
   • BHA monitoring is enabled on a disabled interface of the primary node.
   • CHA heartbeats are only seen on some enabled interfaces of the secondary node.
   • DThe Independent Network Configuration (INC) mode is enabled on the primary node.

   Show answer

   Answer: A

   Next question

7. Question 57 · 133 in bank

   Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly. Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

   • ALeast response time
   • BLeast bandwidth
   • CLeast connection
   • DLeast packets

   Show answer

   Answer: B

   Next question

8. Question 58 · 133 in bank

   Select 3

   What are three possible policy results in a default (advanced) policy configuration? (Choose three.)

   • ATrue
   • BFalse
   • CUndefined
   • DBridge
   • EDrop

   Show answer

   Answer: ABC

   Next question

9. Question 59 · 133 in bank

   Scenario: A Junior Citrix Administrator needs to create a content switching virtual server on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192 168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes. The following day, a Senior Citrix Administrator tests the new content switching virtual server, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible. Why has the Citrix ADC lost the newly added configurations?

   • AThe junior administrator made the changes and did NOT force a failover to save the configurations.
   • BThe junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.
   • CThe Citrix ADC appliances have different firmware versions.
   • DBoth Citrix ADCs in the HA pair restarted overnight.

   Show answer

   Answer: B

   Next question

10. Question 60 · 133 in bank

    Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup. What does the administrator need to do to recover the configuration quickly?

    • ARestore from the revision history.
    • BRun high availability (HA) file synchronization.
    • CRestart the Citrix ADC.
    • DRun saved versus running configuration.

    Show answer

    Answer: A

    Next question

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

1Y0-231 practice, question 51. 133 questions available.